Description Position Summary: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer’s instructio…
About Dialpad Dialpad is the AI-native business communications platform. We unify calling, messaging, meetings, and contact center on a single platform - powered by AI that understands every conversation in real time. Mo…
Skills: Technical Enablement, UCaaS, CCaaS, Cloud Communications, Technical Training
About NovaSource NovaSource Power Services is the world’s #1-ranked solar operations and maintenance (O&M) provider and insight-driven total asset optimization partner for renewables asset owners ready to fuel smar…
Skills: Information Security Management, OT Security, NERC CIP Compliance, Risk Assessment, Incident Response
Do you want to make a difference? Do you want to grow your career at one of the industry’s leading construction firms? Put your expertise and project engineering skills to work at Austin Commercial. Austin Commerci…
Company Description As of January 2026, Averna and Spherea joined forces to form the Spherea Group. A global Test & Quality Solution leader, Averna Powered by Spherea partners with product designers, developers and manuf…
LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operat…
Skills: Analytical Testing, High Purity Gas Systems, Water Distribution Systems, Data Accuracy, Problem-Solving
Job Description Job Description Interpret requirement specifications to achieve system and design strategy for power management products.Technical leadership for major blocks, ensuring designs are successfully guided int…
Skills: Analog Circuit Design, CMOS Power Management, Simulation, Layout Supervision, DFT Strategy
LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operat…
As an Advance Software Engineer, you will be responsible for performing software development activities for Next Gen Flight Management System (NGFMS) product, specifically in User Interface, Datalink and Connected FMS fu…
Skills: C++, C, Embedded Software Development, Avionics, Real-time Systems
DLR Group is an integrated design firm with a promise to elevate the human experience through design. This fuels the work we do around the world and inspires our mission to improve the lives of our clients, our communiti…
Foreman III - Piping Position Overview As a Foreman III - Piping, you'll serve as a senior first-line leader in commercial mechanical projects, independently managing larger crews and more complex piping work for wet-sid…
Design-Build Structures Lead Department: Innovative Pursuits Employment Type: Full Time Location: Tucson, AZ Reporting To: Richard Hansen Compensation: $180,000 - $230,000 / year Description Unmatched Comp Time Policy: H…
Design-Build Structures Lead Department: Innovative Pursuits Employment Type: Full Time Location: Phoenix, AZ Reporting To: Richard Hansen Compensation: $180,000 - $230,000 / year Description Unmatched Comp Time Policy: …
fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife’s portfolio of delicious, lactose-free…
Skills: Mechanical Engineering, High Speed Manufacturing, Dairy Processing, Packaging, Six Sigma
Do you love hands-on work, and working as part of a team? At ISCO, we provide an opportunity to really make a difference. With a high value of appreciation and respect, ISCO strongly focuses on our team members growth an…
Title: Engineer, ESS Development Location: Phoenix, Arizona (675 N, 55th Ave., Phoenix, Arizona) LG Energy Solution Michigan, Inc is a global leader in advanced lithium-ion battery technology for electric vehicle (EV) an…
As a Human Factors Lead Research Scientist here at Honeywell Aerospace, you will lead critical research initiatives focused on human factors engineering within the aerospace domain. You will apply your expertise to guide…
Build, test, and characterize the detector and electronics subsystems that give Azora's receivers their edge. You will work hands-on with sensitive photodetectors, low-noise electronics, and flight avionics – from board-…
Role Be the hands of the integration team: assemble, align, and test precision optomechanical hardware for Azora's space terminals and ground stations. You will build engineering and flight units, run alignment procedure…
Immediately hiring engineers who want to contribute to mission-critical systems that demand precision, accountability, and technical excellence. Success here means solving real problems that keep complex systems moving f…
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
$22/hr–$35/hr
Full-time
professional certificate
Posted 30d ago
~40 hrs/week
Responsibilities
Perform routine maintenance, major inspections, and modifications on various corporate aircraft including HondaJet and LearJets. Ensure all repairs comply with FAA regulations, manufacturer instructions, and safety standards while coordinating shop activities to maximize efficiency.
Requirements
Requires five or more years of experience in aircraft maintenance and a strong understanding of 135 and 145 repair station operations. An Airframe and Powerplant (A&P) certificate is preferred, along with a clean driving record and the ability to pass background and drug screenings.
Full job description
Description
Position Summary:
Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.
Essential Functions and Responsibilities:
Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator.
Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency.
Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43.
Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage.
Ensure that all applicable repair station forms utilized are properly completed.
Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times.
Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate.
Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department.
Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders.
Communicates with the maintenance lead technicians concerning progress of the assigned work.
Perform airframe and powerplant repairs, inspections and modifications.
Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system.
Interpret technical manuals, drawings and blueprints.
Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc.
Displays and promotes a positive attitude toward work and other employees.
Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect.
Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks.
Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management.
Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task.
Participates with management to strategize and implement new maintenance tactics.
Provide leadership and communication to subordinates and employees.
Performs related work as assigned.
Requirements
Education:
Five or more years related experience and/or training; or equivalent combination of education and experience.
Airframe and Powerplant (A&P) Certificate (Preferred).
Experience:
Five or more years demonstrated experience in aircraft maintenance inspections and repairs.
Strong understanding in 135 and 145 repair station operations/regulations required.
Minimum Work Experience Requirement:
Clean driving record.
Able to pass a background check.
Ability to pass a drug screening test.
Willing to work weekends, if needed.
Willing to work off location, if needed.
Ideal candidate will have the following work styles:
Attention to detail.
Persistence in the face of obstacles.
A willingness to take on responsibilities and challenges.
Being reliable, responsible, and dependable, and fulfilling obligations.
Being pleasant with others on the job and displaying a good-natured, cooperative attitude.
Being sensitive to others' needs and feelings and being understanding and helpful on the job.
Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods.
Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations.
Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.
Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills.
Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.
Founded in 1928 by William P. Cutter, Cutter Aviation is a full-service aviation company, offering aircraft fueling, maintenance and avionics solutions, aircraft charter, management and aircraft sales. Serving the business aviation industry, Cutter has operations at nine major airports in Arizona (Phoenix, Deer Valley; Phoenix, Sky Harbor; and Prescott), New Mexico (Albuquerque), California (Carlsbad), Colorado (Colorado Springs and Centennial) and Texas (Dallas/Addison, Georgetown, and San Antonio). The company is a member of the Pinnacle Air Network, National Business Aviation Association (NBAA), and the National Air Transportation Association (NATA). Cutter is the oldest continuously family-owned and operated FBO (Fixed Base Operator) with over 97 years of serving the aviation community.
Cutter Aviation is an Authorized New Aircraft Sales Dealer for Pilatus and Piper.
Offices: Phoenix Sky Harbor Int'l Airport, 2802 E. Old Tower Road, Phoenix, AZ 85034, US · Albuquerque Int'l Sunport, 2502 Clark-Carr Loop SE, Albuquerque, NM 87106, US · San Antonio Int'l Airport, 367 Sandau Road, San Antonio, TX 78216, US · 4500 Claire Chennault Drive, Addison, TX 75001, US · 600 S Hangar Dr, Georgetown, Texas 78628, US
Based on 2273 listings with disclosed salaries, most engineering jobs in Arizona pay between $78k–$184k per year. Individual offers vary with seniority, company size, and specialization.
How many Engineering jobs are open in Arizona right now?
There are currently 6,762 open engineering positions in Arizona listed on Clera. New openings are added daily as companies post roles.
Which companies are hiring for Engineering roles in Arizona?
Companies currently hiring include RTX, Honeywell Technologies, Sociedad Contractual Minera El Abra, Northrop Grumman, Freeport-McMoRan, among others. Browse the listings above to see every active employer.
Are there remote or hybrid Engineering jobs in Arizona?
Yes — 1221 of the 6762 open engineering positions offer remote or hybrid work (311 remote, 910 hybrid).
How do I apply for Engineering jobs in Arizona?
Each listing links directly to the employer's application page. Apply early — fresh listings get the most recruiter attention in the first two weeks.