How many Manufacturing jobs are open in Greenville, SC right now?

There are currently 15 open manufacturing positions in Greenville, SC listed on Clera. New openings are added daily as companies post roles.

Which companies are hiring for Manufacturing roles in Greenville, SC?

Companies currently hiring include CONA Services, iParametrics, LLC, Standard Motor Products, AFL Telecommunications LLC, Atlanta Flooring Design Centers, Inc., among others. Browse the listings above to see every active employer.

How do I apply for Manufacturing jobs in Greenville, SC?

Each listing links directly to the employer's application page. Apply early — fresh listings get the most recruiter attention in the first two weeks.

Manufacturing Jobs in Greenville, SC

Position Summary:

The purpose of this position is to provide essential technical knowledge and perform engineering work as described below. This position serves as a staff engineer performing engineering assignments of intermediate complexity. This position is full time, on-site in Greenville, SC.

Duties and Responsibilities:

Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned

Basic Job Requirements:

U.S. Citizenship required
Bachelor of Science degree in Electrical (Power) Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment

Discipline Specific Job Requirements:

Create and modify electrical design drawings (e.g., single line diagrams, schematics, wiring diagram layouts, raceway, lighting, and grounding)
Perform complex system studies (e.g., short circuit, load flow, stability, motor starting, harmonics, relay coordination and ground grid)
Develop area classifications and design documents
Develop electrical design documents
Perform electrical calculations such as short circuit, relay coordination, voltage drop, cable de-rating and cable pulling tension
Prepare motor schematics and wiring diagrams

Preferred Qualifications:

Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:

- U.S Department of Energy or other U.S. Federal Government Agency

- Nuclear facilities under a nuclear quality assurance program

- Manufacturing, pharmaceutical or biotechnology

Proficiency with Intergraph Smart3D (S3D)
Proficiency with Visual Professional lighting design software
Advanced knowledge of electrical power systems software (e.g., SmartPlant Electrical (SPEL), Electrical Transient and Analysis Program (ETAP), etc.)
Intermediate knowledge of power systems

Position Summary:

Duties and Responsibilities:

Under direct supervision of the Discipline Lead Engineer or Area Lead Engineer, analyze and make independent recommendations regarding technical solutions to problems of intermediate complexity in accordance with project requirements
Develop and review specifications and design criteria
Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of intermediate complexity
Coordinate technical issues with other disciplines, project management, vendors and clients
Execute work in compliance with Project Quality Plan and procedures
Execute work in accordance with the approved project scope, cost and schedule baselines
Establish, control and report on material key quantities; provide analysis and forecasts
Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals
Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes
Other duties as assigned

Basic Job Requirements:

U.S. Citizenship required
Bachelor of Science degree in Electrical (Power) Engineering and minimum five (5) years of work-related experience
Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards
Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors
Job related technical knowledge necessary to complete the job
Intermediate knowledge of discipline codes and standards
Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines
Ability to attend to detail and work in a time-conscious and time-effective manner
Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs
Experience providing engineering, procurement and construction (EPC) services on commercial or industrial projects
Proficiency executing EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment

Discipline Specific Job Requirements:

Create and modify electrical design drawings (e.g., single line diagrams, schematics, wiring diagram layouts, raceway, lighting, and grounding)
Perform complex system studies (e.g., short circuit, load flow, stability, motor starting, harmonics, relay coordination and ground grid)
Develop area classifications and design documents
Develop electrical design documents
Perform electrical calculations such as short circuit, relay coordination, voltage drop, cable de-rating and cable pulling tension
Prepare motor schematics and wiring diagrams

Preferred Qualifications:

Professional Engineer license
Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1
Practical field experience
EPC project experience for the following industries:

- U.S Department of Energy or other U.S. Federal Government Agency

- Nuclear facilities under a nuclear quality assurance program

- Manufacturing, pharmaceutical or biotechnology

Proficiency with Intergraph Smart3D (S3D)
Proficiency with Visual Professional lighting design software
Advanced knowledge of electrical power systems software (e.g., SmartPlant Electrical (SPEL), Electrical Transient and Analysis Program (ETAP), etc.)
Intermediate knowledge of power systems

Manufacturing Jobs in Greenville, SC (Now Hiring) — 15 open

Electrical Design Engineer

Electrical Designer

Design Engineering - Applications Engineer

Fuel Injector - Cnc Operator

Production Supervisor

Assembly Technician

PT Repack Specialist

Warehouse Associate

EHS Leader

Part Time Order Checker

2nd Shift Full Time Forklift Operator II

Field Sales Representative

Forklift Operator-Warehouse

Control Systems Design Engineer IV

Network Technician (Hardware)

Frequently asked questions

How many Manufacturing jobs are open in Greenville, SC right now?

Which companies are hiring for Manufacturing roles in Greenville, SC?

How do I apply for Manufacturing jobs in Greenville, SC?

Manufacturing jobs in other cities

Other jobs in Greenville, SC

Electrical Design Engineer

Job description

Tools

Explore

Company

Tools

Explore

Company

Manufacturing Jobs in Greenville, SC (Now Hiring) — 15 open

Electrical Design Engineer

Electrical Designer

Design Engineering - Applications Engineer

Fuel Injector - Cnc Operator

Production Supervisor

Assembly Technician

PT Repack Specialist

Warehouse Associate

EHS Leader

Part Time Order Checker

2nd Shift Full Time Forklift Operator II

Field Sales Representative

Forklift Operator-Warehouse

Control Systems Design Engineer IV

Network Technician (Hardware)

Frequently asked questions

How many Manufacturing jobs are open in Greenville, SC right now?

Which companies are hiring for Manufacturing roles in Greenville, SC?

How do I apply for Manufacturing jobs in Greenville, SC?

Manufacturing jobs in other cities

Other jobs in Greenville, SC

Electrical Design Engineer

Job description

Tools

Explore

Company