Spokane, Washington, United States · On-site
$35/hr–$42/hr
Description Estimator II Job Description Sytech is a Precision Metal Fabrication company, the Estimator II position is responsible for preparing cost estimates by analyzing proposals and requirements that are vital to ou…
Skills: Cost Estimation, Blueprint Reading, Requirements Analysis, Strategic Planning, Data Center Experience
Spokane, Washington, United States · Hybrid
$68k–$186k/yr
Closes: Open until filled Job Description The Substation Maintenance Engineer supports the safe, reliable, and efficient operation of substation equipment through maintenance program oversight, field support, technical t…
Skills: Substation Maintenance, Technical Troubleshooting, Regulatory Compliance, Equipment Commissioning, Failure Analysis
Seattle, Washington, United States · On-site
$131k–$183k/yr
Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re workin…
Skills: Avionics Testing, Root Cause Analysis, Analog Electronics, Digital Electronics, EMI Testing
Spokane, Washington, United States · On-site
$21/hr–$28/hr
Job DetailsJob Location: LH Spokane - Spokane, WA 99208Position Type: Full TimeEducation Level: High SchoolSalary Range: $23.00 - $31.00 HourlyTravel Percentage: NegligibleJob Shift: Day ShiftJob Category: QA - Quality C…
Skills: Quality Inspection, Aerospace Manufacturing, Inspection Tools, Customer Service, Communication Skills
Spokane, Washington, United States · Hybrid
$88k–$163k/yr
Closes: July 13, 2026 Job Description Provides technical and program management leadership in developing, monitoring, and administering Enterprise Safety & compliance program objectives. Leads and supports proactive prog…
Skills: Program Management, Electric Safety, Risk Management, Regulatory Compliance, Safety Management Systems
Spokane, Washington, United States · Hybrid
$88k–$163k/yr
Closes: July 13, 2026 Job Description Provides technical and program management leadership in developing, monitoring, and administering Enterprise Safety & compliance program objectives for HOP. Leads and supports proact…
Skills: Program Management, Technical Leadership, Budgeting, Change Management, HOP Principles
Spokane, Washington, United States · On-site
$20/hr–$37/hr
Largest aluminum scrap recycler west of Mississippi. 100+ year old family owned and operated firm. Travis Pattern and Foundry is the largest privately owned provider of aluminum castings west of the Mississippi. 4th Gene…
Skills: Mechanical Troubleshooting, Hydraulics, Pneumatics, Welding, Preventative Maintenance
Spokane, Washington, United States · On-site
$23/hr–$30/hr
Largest aluminum scrap recycler west of Mississippi. 100+ year old family owned and operated firm. Travis Pattern and Foundry is the largest privately owned provider of aluminum castings west of the Mississippi. Fourth-g…
Skills: Aluminum Welding, Grinding, Lifting, Manual Dexterity, Production Welding
Seattle, Washington, United States · On-site
$188k–$263k/yr
Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We’re workin…
Skills: Talent Acquisition Strategy, Executive Stakeholder Management, Team Leadership, Operational Excellence, Program Management
Spokane, Washington, United States · On-site
$20/hr–$50/hr
Overview Diesel Technicians at Gordon Truck Centers (GTC) dealerships lead the charge in workmanship, commitment to safety, and providing reliable, first-class service to customers across the Pacific Northwest. GTC build…
Skills: Diagnostic Testing, Engine Repair, Steering Mechanism Repair, Transmission Repair, Braking System Repair
Spokane, Washington, United States · On-site
$25/hr–$33/hr
Job DetailsJob Location: Spokane TMP - Spokane, WA 99202Position Type: Full TimeSalary Range: $25.00 - $33.00 HourlyJob Shift: DayTaylor Metal Products is a leading manufacturer of high end steel roofing and siding produ…
Skills: Preventive Maintenance, Mechanical Troubleshooting, Electrical Repair, Hydraulic Repair, Welding
Spokane, Washington, United States · On-site
$68k–$124k/yr
COMPANY INFORMATION: Established in 1986, ATS Automation is the leading provider of energy management services, automated control systems, critical airflow solutions, and building systems integration. We aim to be the ma…
Skills: Programming, Analytical Skills, Communication Skills, Troubleshooting, PLC
Spokane, Washington, United States · On-site
At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work ever…
Skills: Administrative Support, MS Office, Calendar Management, Reception, Written Communication
Spokane, Washington, United States · On-site
$30/hr–$40/hr
About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and oper…
Skills: Fire Alarm Systems, Low Voltage Electrical Systems, Troubleshooting, Blueprint Reading, NICET Level II
Spokane, Washington, United States · On-site
At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work ever…
Skills: Administrative Support, MS Office, Calendar Management, Reception, Written Communication
Spokane, Washington, United States · Hybrid
$60k–$65k/yr
Meet CFS Technologies Ready to Join the Hygiene Revolution? CFS Technologies is a family of industry-leading brands dedicated to advancing hygiene, safety, and operational efficiency across a wide range of industries. Th…
Skills: Machine Maintenance, Plumbing, Mechanical Operations, Electrical Operations, Blueprint Reading
Spokane, Washington, United States · On-site
$70k–$110k/yr
Hermanson Company is a standout Mechanical company that has been doing business in the Puget Sound area since 1979. Over the last four decades we have grown from a family owned sheet metal contractor to a partner led ful…
Skills: Project Management, Estimating, Budgeting, Document Control, Communication
Spokane, Washington, United States · On-site
$120k–$160k/yr
Hermanson Company is a standout Mechanical company that has been doing business in the Puget Sound area since 1979. Over the last four decades we have grown from a family owned sheet metal contractor to a partner led ful…
Skills: Project Management, HVAC Construction, Mechanical Systems, Plumbing Systems, Budget Management
Spokane, Washington, United States · On-site
$90k–$120k/yr
DCI Engineers - Spokane Ready to take your engineering career to the next level? DCI Engineers is seeking a Structural Engineering Project Manager in our Spokane, WA office. You’ll apply your structural engineering…
Skills: Structural Project Management, Steel Design, Concrete Design, Wood Design, Masonry Design
Spokane, Washington, United States · On-site
POSITION OBJECTIVE/RESPONSIBILITIES: The Targets Senior Quality Manager position leads the ESM Targets Quality Team, which currently consists of three manufacturing sites along with tollers and distribution warehouses. T…
Skills: Quality Management, ISO 9001, IATF 16949, Lean Six Sigma, Problem Solving
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
The Estimator II is responsible for preparing detailed cost estimates by analyzing proposals, blueprints, and specifications for precision metal fabrication. They must maintain cost databases and provide timely responses to customer requests while ensuring quality and safety standards.
Candidates should have 5+ years of experience in estimating and planning, specifically with data center experience and the ability to read blueprints. Advanced math and computer skills, along with strong communication abilities, are required.
Description
Sytech is a Precision Metal Fabrication company, the Estimator II position is responsible for preparing cost estimates by analyzing proposals and requirements that are vital to our production of our products for our customers. This position requires a highly self-motivated individual who is willing to be a value-added member of our team. This is a unique position, and we require this individual to be flexible and willing to always keep the external customers in mind; while maintaining Quality of Workmanship, Safety, Accountability, and Teamwork, which is vital to our mission.
All employees are expected to understand and maintain the core values of Sytech. The Core Values of Sytech are VITAL to the mission and to the future growth and the quality of the products that we manufacture.
All positions vary in assignment based on the current needs of the business. Lots of potential for cross training. All individuals must be willing and able to be moved throughout the shop to contribute to the success of achieving each day’s goals.
Employees are always expected to act in a safe manner and ensure that those around them do not put themselves or others at risk. Safety is everyone’s responsibility. At ALL times working safely is a condition of employment.
All employees are expected to interact with other members of the organization in a professional and respectful manner with the goal of producing on-time and quality work being the highest priority. Friendly interpersonal relationships are encouraged, but performance and quality, focus and productivity are required.
All employees must maintain a professional attitude and approach to issues within the company, their own department, and other departments with which they interact.
Sytech is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.
This job description is not meant to be all inclusive of duties. Others can and will be assigned.
$35.00 -$42.00 Hrly
Requirements
Analyzing Information , Estimating, Planning, Reporting Research Results, Data Center Experience, Strategic Planning, Attention to Detail, Informing Others, Requirements Analysis
Precision machining & sheet metal fabricator. ISO9001 certified. UL Listed. Turn-key solutions. Lean mfg customer focus.
Precision sheet metal & machining fabricator since 1996. Sytech serves industries including telecommunications, aerospace, agricultural, food & beverage, light industrial, medical, and general consumer applications. Services include: CNC machining, state-of-the art laser cutting & punch, press brake forming, welding, powder coat, silk screen, hardware fastening, in-line CNC gasket, surface finishing, assembly, & final packaging. Working environment is clean, organized, and geared toward Continuous Improvement. Sytech encourages all employees to engage in creative Lean thinking to innovate company process and flow value to the customer.
Offices: 3900 E. Main St., Spokane, WA 99202, US
There are currently 153 open engineering positions in Spokane, WA listed on Clera. New openings are added daily as companies post roles.
Companies currently hiring include Blue Origin, R&R Heating & Air Conditioning, Solstice Advanced Materials, JLL, Pye-Barker Fire & Safety, among others. Browse the listings above to see every active employer.
Yes — 20 of the 153 open engineering positions offer remote or hybrid work (10 remote, 10 hybrid).
Each listing links directly to the employer's application page. Apply early — fresh listings get the most recruiter attention in the first two weeks.
