NXP’s Industrial & IoT Edge solutions range from the smallest MCUs to very high-performance processors to provide real-time insights and efficient automation when performance matters most. NXP’s advanced portfolio of edg…
OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and c…
Skills: Power Electronics, Motor Control, Matlab, Simulink, Modelling and Simulation
Internship – Full Stack Web Application Developer – ST eDesignSuite
Catania, Sicily, Italy · On-site
Entry level$2.7B raised
OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and c…
Job Description Renesas is seeking a motivated and experienced Staff Test Engineer to support test development activities for new products within the Performance Computing Power (PCP) business unit in Catania, Italy. Thi…
Skills: ATE Development, Product Debugging, Data Analysis, Analog Systems, Mixed-Signal Systems
Job Description Renesas is seeking a motivated and experienced Staff Test Engineer to support test development activities for new products within the Performance Computing Power (PCP) business unit in Catania, Italy. Thi…
Skills: ATE Development, Product Debugging, Data Analysis, Analog Systems, Mixed-Signal Systems
Job Description Renesas is seeking a talented Senior Test Engineer to support test development activities for new products within the Performance Computing Power (PCP) business unit in Catania, Italy. This role is an exp…
Skills: ATE Test Development, Product Validation, Debugging, Analog Circuits, Mixed-Signal Circuits
Job Description Renesas is seeking a talented Senior Test Engineer to support test development activities for new products within the Performance Computing Power (PCP) business unit in Catania, Italy. This role is an exp…
Skills: ATE Test Development, Product Validation, Debugging, Analog Circuit Debugging, Mixed-Signal Circuit Debugging
Job Description Renesas is seeking a highly experienced Principal Test Engineer to drive advanced test development for new products within the Performance Computing Power (PCP) business unit in Catania, Italy. This role …
Skills: ATE Test Development, DFT Techniques, Analog/Mixed-Signal ICs, Power Management ICs, Data Analysis
Fincons Group è una società internazionale di consulenza IT che da oltre 40 anni accompagna le imprese nel cogliere le opportunità del cambiamento digitale, proponendo soluzioni e tecnologie all’avanguardia che anticipan…
Skills: SAP MM, SAP SD, Logistics Execution, Supply Chain Management, SAP S/4HANA
The Automation, Electrical & Controls Engineer (AE&C) is responsible for the development, maintenance and optimization of automation and control systems in a UPW treatment plant. The role focuses on PLC programming, SCAD…
Do you want a job with a purpose? And do you want to make healthcare safer, better and more reliable? Join our Team! Unisciti a noi come Project Manager presso Dedalus, una delle aziende leader mondiali nello sviluppo di…
Skills: Project Management, IT Project Control, Healthcare Informatics, Stakeholder Management, Digital Transformation
Process Engineer -SiC Campus (Fixed Term Contract)
Catania, Sicily, Italy · On-site
$38k–$45k/yr
Mid level$2.7B raised
OUR STORY At ST, we believe in the power of technology to drive innovation and make a positive impact on people, business, and society. We are a global semiconductor company, and our advanced technology & chips forms the…
Skills: Engineering, Material Science, Physics, Chemistry, Silicon Processing
OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and c…
Job Description Looking for an experienced and talented Layout Design Engineer where in the candidate will get to work on a wide range of exciting products such as DC-DC converters, Controllers and Drivers. Essential Fun…
Skills: Analog Layout Design, Floorplanning, Leaf Cell Layout, EM and Reliability Design, Virtuoso XL
OUR STORY At STMicroelectronics, we believe in the power of technology to drive innovation and make a positive impact on people, businesses, and society. As a global semiconductor company, our advanced technologies and c…
NXP’s Industrial & IoT Edge solutions range from the smallest MCUs to very high-performance processors to provide real-time insights and efficient automation when performance matters most. NXP’s advanced portfolio of edg…
Skills: Analog Design, Circuit Architecture, ADC, DAC, PLL
Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that help…
Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that help…
NXP’s Industrial & IoT Edge solutions range from the smallest MCUs to very high-performance processors to provide real-time insights and efficient automation when performance matters most. NXP’s advanced portfolio of edg…
Skills: Mixed Signal Verification, System Verilog, Verilog-AMS, Verilog-A, Analog Design
Job Description Renesas is looking for a Staff Analog Engineer to join the Client Core Power Business Division team in Catania, Italy. In this role, you will work on the design and development of smart power stages and p…
Skills: Analog IC Design, Mixed-Signal Circuit Design, Power Management ICs, Cadence Design Tools, Transistor Level Design
Act as a technical lead bridging hardware and software teams to develop high-quality low-level IP firmware and drivers for MCU platforms. Ensure consistency across simulation, emulation, and silicon phases while delivering scalable SDKs for internal and external customers.
Requirements
Requires a Master's degree in Electrical or Electronics Engineering and at least 15 years of experience in MCU/MPU architecture and firmware development. Must possess deep expertise in RTL simulation, ARM subsystems, and proficiency in C/C++ and Assembly.
Full job description
NXP’s Industrial & IoT Edge solutions range from the smallest MCUs to very high-performance processors to provide real-time insights and efficient automation when performance matters most. NXP’s advanced portfolio of edge processing solutions lets developers explore their most innovative ideas with confidence, enabling applications across the autonomous home, industrial automation, and personal electronics.
NXP is building new teams in Catania to create high impact micro-controllers (MCU) as part of NXP’s intelligent AI at the Edge. This team will include a wide range of engineering talent from analog to SOC digital design. Full product development local will product world class products at a world class pace.
This role is a technical leader that bridges between HW and SW to ensure world-class solutions for our customers. The selected candidate will be a bridge to central SW team and will reside and work alongside the HW team to reuse and develop low level drivers. Responsible for ensuring high quality drivers to take full advantage of HW features and make them available via the SDK to customers (internal and external). He will drive HW-SW to ensure consistency, early verification of drivers and ROM features in simulation and in emulation before silicon tape out. The role will also ensure that product verification (SW + HW teams) and all validation teams are enabled with the same drivers for validation of the product.
Your Responsibilities.
Technical lead for given SOC products in developing low‑level IP firmware (device drivers) for MCU platforms, ensuring high quality and reusability. Work closely with central SW teams to maximize reuse, consistency and ensure HW compatibility.
Define and drive software architecture methodologies, standards, and best practices that enable consistent and reusable low‑level APIs across programs.
Architect and deliver comprehensive IP firmware/driver solutions that support all phases of the lifecycle—RTL verification, virtual simulation, SoC verification, post‑silicon validation, and SDK integration
Partner with pre‑silicon and post‑silicon teams to align HAL/SDK development with IP interface requirements and features.
Work closely with HW, SW architects and SOC designers to initiate firmware development in parallel with hardware development.
Review hardware register definitions and documentation early and regularly to remove disconnects and provide actionable feedback to improve software usability and long‑term maintainability. This role owns any gap closure.
Establish and maintain backward‑compatible software interfaces as hardware IP evolves across products. Ensure linkage with HW IP and central SW team.
Create architectural frameworks that promote consistency and scalability of driver implementations.
Define best practices for delivering enablement drivers alongside hardware IP, ensuring smooth integration into SoC platforms and customer SDKs.
Support multiple execution environments—simulation, emulation, and silicon—to ensure robust API behavior.
Champion quality practices including design reviews, code reviews, static analysis, and adherence to coding standards.
Produce clear, comprehensive technical documentation, reports, and presentations for stakeholders and milestone reviews.
Use Git, JIRA, and Confluence to drive project execution, collaboration, and traceability.
Mentor and guide junior and mid‑level software engineers, providing technical leadership and fostering a collaborative team environment.
Contribute to ongoing optimization of firmware development workflows, tools, and cross‑team processes.
YourProfile.
Master’s degree in Electrical Engineering, Electronics Engineering, or a related field.
Experience in RTL simulation and emulation. Must be able to understand how SOC’s are built and be able to work with RTL, HW and SW verification environments.
Minimum of 15 years of experience in architecture and/or firmware development for MCUs/MPUs.
Deep expertise in MCU/MPU SW architecture and low‑level firmware development, including RTL bring‑up, driver design, and platform‑level integration.
Ability to lead by influence and bring cross‑functional teams together to accomplish goals.
Experience leveraging AI capabilities to accelerate software development and documentation.
Proficiency with ARM processor subsystems, tools, and debugging methodologies.
Experience working with embedded RTOS and compilers.
Competence in low‑level software testing and debugging for MCUs and MPUs.
Ability to work in a multi‑site, multi‑time‑zone environment.
Proficiency in C/C++/Assembly languages and at least one scripting language.
Excellent problem‑solving, analytical, and debugging skills.
Strong communication and interpersonal skills, with the ability to effectively collaborate with cross‑functional teams and mentor junior engineers.
Prior experience in a technical leadership role, driving projects and influencing technical direction is highly desirable.
-----------
NXP is committed to equal pay for equal work and work of equal value and applies fair, consistent and transparent remuneration practices.
As of the date of this posting, the estimated gross annual base salary range for this position in Italy is between 77,200 € and 106,300 € annually. This range is intended as a guideline. Actual compensation may vary based on qualifications, experience, skills, and specific business or organizational needs.
This position falls under the applicable National Collective Labour Agreement (Metalmeccanica Industria).
Where relevant, the total compensation package may also include additional elements such as annual incentive opportunities and/or equity, along with a competitive benefits package.
We anticipate tomorrow’s needs—navigating a changing world by bringing together technology's brightest minds to build game-changing solutions that propel us forward.
NXP Semiconductors N.V. (NASDAQ: NXPI) is the trusted partner for innovative solutions in the automotive, industrial & IoT, mobile, and communications infrastructure markets. NXP's "Brighter Together" approach combines leading-edge technology with pioneering people to develop system solutions that make the connected world better, safer, and more secure. The company has operations in more than 30 countries and posted revenue of $12.61 billion in 2024. Find out more at www.nxp.com.
Career Development Opportunities : Bright Minds. Bright Futures.
We believe that a key component to growing our business is to develop our people. To enable you to grow your career at NXP, we offer online and offline learning opportunities to help you develop some of your core and professional skills.
Commitment At NXP.
We recognize NXP is a powerful change agent as we continue to deliver innovative solutions that advance a more sustainable future. We remain steadfast in our commitment to sustainability and making measurable year-on-year progress. Also, we aim to create an inclusive work environment and we will not tolerate racism, discrimination or harassment of any kind. We have programs in place focused on diversity, inclusion and equality.
Privacy Policy: https://www.nxp.com/company/about-nxp/privacy-policy-for-social-media-pages:PRIVACY-POLICY-SOCIAL-MEDIA
Offices: High Tech Campus 60, Eindhoven, Noord-Brabant 5656 AG, NL · 6501 West William Cannon Drive, Austin, Texas 78753, US · 411 E Plumeria Dr, San Jose, CA 95134, US · Kanata, Ontario, CA · Guadalajara, MX
How many Technology jobs are open in Catania, Italy right now?
There are currently 54 open technology positions in Catania, Italy listed on Clera. New openings are added daily as companies post roles.
Which companies are hiring for Technology roles in Catania, Italy?
Companies currently hiring include Renesas Electronics, NXP Semiconductors, STMicroelectronics, World Lending Group (WLG), Applied Materials, among others. Browse the listings above to see every active employer.
Are there remote or hybrid Technology jobs in Catania, Italy?
Yes — 13 of the 54 open technology positions offer remote or hybrid work (1 remote, 12 hybrid).
How do I apply for Technology jobs in Catania, Italy?
Each listing links directly to the employer's application page. Apply early — fresh listings get the most recruiter attention in the first two weeks.