Ingénieur Projet – eBoP (electrical Balance of Plant) H/F
Grenoble, Auvergne-Rhône-Alpes, France · On-site
Senior$2.6B raised
Job Description Summary Job Description Role Summary/Purpose: L’Ingénieur Projet eBoP est responsable des études de conception, de dimensionnement, de performance et de conformité des systèmes électriques courant continu…
Skills: DC Electrical Systems, Low Voltage Systems, Electrical Design, Technical Specifications, Single-line Diagrams
Technicien Analyses Chimiques Mesures Physiques (H/F) À propos d'Umicore Réduire les émissions polluantes des voitures. Alimenter les véhicules du futur. Donner une nouvelle vie aux métaux usagés. Nous sommes la première…
Skills: Chemical Analysis, Physical Measurements, Material Characterization, ICP OES, Atomic Absorption Spectroscopy
Technicien de Production / Fabrication en 5*8 (H/F) - Grenoble
Grenoble, Auvergne-Rhône-Alpes, France · On-site
Mid level$1.1B raised
Technicien de production / fabrication en 5x8 (H/F) - Grenoble À propos d'Umicore Réduire les émissions polluantes des voitures. Alimenter les véhicules du futur. Donner une nouvelle vie aux métaux usagés. Nous sommes la…
Skills: Process Control, Hydrometallurgy, SAP, Forklift Operation, Chemical Risk Management
Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos t…
Au sein de notre société Manumesure, spécialisée en métrologie et contrôles réglementaires, découvrez des équipes de personnes passionnées, engagées, et dotées d’une grande expertise métier. S’appuyant sur 12 agences en …
Skills: Metrology, Calibration, Electrical Measurement, Weight Measurement, Temperature Measurement
Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos t…
Skills: Digital Verification, SystemVerilog, UVM, SVA, CDV/CRV
Inspecteur Equipements sous Pressions en Service et TMD (F-H-X)
Grenoble, Auvergne-Rhône-Alpes, France · On-site
$32k–$35k/yr
Entry level
Rejoignez notre équipe ! En autonomie sur des projets variés, vous développerez votre expertise dans un environnement stimulant. VOTRE QUOTIDIEN SI VOUS NOUS REJOIGNEZ Dans le cadre de notre développement, nous recrutons…
Inspecteur Equipements sous Pressions en Service et TMD (F-H-X)
Grenoble, Auvergne-Rhône-Alpes, France · On-site
$32k–$35k/yr
Entry level
Rejoignez notre équipe ! En autonomie sur des projets variés, vous développerez votre expertise dans un environnement stimulant. VOTRE QUOTIDIEN SI VOUS NOUS REJOIGNEZ Dans le cadre de notre développement, nous recrutons…
SAP Supply Chain Technical Process Owner (Budapest or Grenoble HYBRID)
Grenoble, Auvergne-Rhône-Alpes, France · Hybrid
Senior+
About Us Gramian Consultancy is a boutique consultancy specializing in IT professional services and engineering talent solutions. With a strong background in engineering and leadership, we help companies build high-perfo…
Skills: SAP MM, SAP SD, MRP, SAP S/4HANA, SAP Public Cloud
SAP SD/MM Technical Process Owner (Budapest or Grenoble HYBRID)
Grenoble, Auvergne-Rhône-Alpes, France · Hybrid
Senior+
About Us Gramian Consultancy is a boutique consultancy specializing in IT professional services and engineering talent solutions. With a strong background in engineering and leadership, we help companies build high-perfo…
Skills: SAP SD, SAP MM, SAP S/4HANA, SAP Public Cloud, Configuration
SAP Project Systems Technical Process Owner (Budapest or Grenoble HYBRID)
Grenoble, Auvergne-Rhône-Alpes, France · Hybrid
Senior+
About Us Gramian Consultancy is a boutique consultancy specializing in IT professional services and engineering talent solutions. With a strong background in engineering and leadership, we help companies build high-perfo…
Skills: SAP Project Systems, SAP S/4HANA, SAP Public Cloud, Configuration, Data Mapping
CDI - Senior Ingénieur Digital Design Front End Cryptographie (H/F)
Grenoble, Auvergne-Rhône-Alpes, France · On-site
Senior$2.7B raised
Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos t…
CDI - Senior Ingénieur Digital Design Front End Cryptographie (H/F)
Grenoble, Auvergne-Rhône-Alpes, France · On-site
Mid level$2.7B raised
Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos t…
Skills: Digital Design, Cryptography, RTL Implementation, VHDL, Verilog
Chez STMicroelectronics, nous sommes convaincus que la technologie est un moteur d’innovation et a un impact positif pour les entreprises, les personnes et la société. En tant qu’acteur mondial des semiconducteurs, nos t…
Skills: Product Engineering, Statistical Analysis, English Proficiency, Project Management, Industrialization
Chargé de projet achat – Pièces de Forge et de Fonderie H/F
Grenoble, Auvergne-Rhône-Alpes, France · On-site
Mid level$2.6B raised
Job Description SummaryÀ propos de notre activité S'appuyant sur plus de 130 ans d'expérience dans la résolution des défis mondiaux, GE Vernova occupe une position unique pour contribuer à la transition énergétique en co…
Skills: Supplier Relationship Management, Contract Management, Negotiation, Order Execution, Quality Control
Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory aut…
Skills: Project Management, Micro-electronics, MS-Project, Risk Management, Technical Proposal Development
These are exciting times at EMBL Grenoble. We are looking to strengthen our development team with an enthusiastic CAD Engineer. The Instrumentation Team develops high-precision instruments dedicated to Macromolecular X-r…
Skills: CAD, SolidWorks, Mechanical Design, Mechatronics, Vacuum Systems Design
ABGI Technology recrute pour son client, leur futur Concepteur de composants photoniques silicium F/H en CDI, basé à Grenoble (38) 🔎VOS MISSIONS Notre client recherche un(e) Concepteur(trice) de composants photoniques s…
ABGI Technology recrute pour son client, leur futur Ingénieur CAO Masques (Mask CAD Engineer) F/H en CDI, basé à Grenoble (38) 🔎VOS MISSIONS Notre client est une société fabless qui développe et commercialise des soluti…
ABGI Technology recrute pour son client, leur futur Concepteur de laser DFB haute puissance F/H en CDI, basé à Grenoble (38) 🔎VOS MISSIONS Nous recherchons un(e) Concepteur(trice) expérimenté(e) de lasers-SOA à semi-con…
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
Full-time
postgraduate degree
Posted 26d ago
~40 hrs/week
Responsibilities
Responsible for the design, sizing, and compliance of DC and low-voltage electrical systems for hydroelectric power plants. The role involves managing the full project lifecycle from needs analysis to site commissioning and supplier technical follow-up.
Requirements
Requires a Master's degree in electrical engineering with 5 to 10 years of experience in DC and low-voltage system design. Proficiency in AutoCAD, EPlan, and ETAP, along with fluency in English and French, is essential.
Full job description
Job Description Summary
Job Description
Role Summary/Purpose:
L’Ingénieur Projet eBoP est responsable des études de conception, de dimensionnement, de performance et de conformité des systèmes électriques courant continu et basse tension, dans le cadre de projets de centrales hydroélectriques.
Il/elle intervient depuis l’analyse des besoins jusqu’au support au montage et à la mise en service, en garantissant la conformité technique, contractuelle et normative des solutions développées.
Profil :
Nous recherchons un(e) ingénieur(e) disposant d’une solide expérience en études de systèmes électriques courant continu.
Une expérience complémentaire en installation, montage et/ou mise en service sur site constituera un atout majeur.
Responsabilités :
Réaliser les études de conception des systèmes électriques courant continu et basse tension, en tenant compte des besoins du projet et des exigences contractuelles
Élaborer les spécifications techniques des équipements et sous-ensembles
Participer aux réunions techniques et de suivi avec les clients finaux , à distance et/ou sur site
Réaliser ou superviser les études de détail :
schémas unifilaires
schémas électriques
nomenclatures
fiches techniques
notes de calcul
listes d’interconnexions
listes de câbles
Garantir la bonne intégration des équipements et systèmes dans l’installation globale
Piloter, le cas échéant, les études sous-traitées et assurer leur conformité technique
Analyser les offres fournisseurs et contribuer aux choix techniques
Assurer le suivi technique des fournisseurs et vérifier la conformité des équipemens réalisés avec les spécifications d’achat
Gérer les interfaces entre systèmes et équipements
Participer à la validation du hardware et du software des équipements
Apporter un support technique aux équipes en charge du montage, de l’installation et de la mise en service sur site
Mettre à jour la documentation technique et les dossiers tel que construit
Qualifications / Expérience :
Formation Bac+5 en génie électrique, électrotechnique, électronique ou domaine équivalent
Expérience significative en bureau d’études électriques de systèmes DC et Basse Tension, idéalement de 5 à 10 ans, avec une expertise marquée en courant continu (batteries, distribution DC, systèmes associés)
Bonne maîtrise des études électriques :
rédaction de spécifications techniques
schémas unifilaires
schémas électriques
listes d’interconnexions
listes de câbles
définition de matériels
Maîtrise des outils tels que AutoCAD, EPlan, ETAP et des outils de calculs électriques
Bonne connaissance des normes IEC, IEEE, ANSI, ainsi que des exigences réglementaires applicables
Une expérience en installation sur site, montage ou mise en service serait fortement appréciée
Compétences :
Rigueur
Bon sens de l’organisation, notamment dans des environnements techniques complexes
Capacité à définir des plans d’action et à gérer les priorités
Esprit d’équipe
Aisance dans des environnements multiculturels et internationaux
Proactivité
Disponibilité pour des déplacements professionnels
Langues :
Anglais courant indispensable et français
Une autre langue serait un plus (espagnol, allemand)
Poste ouvert aux personnes en situation de handicap
The eBoP Lead Project Engineer is responsible for the design, sizing, performance, and compliance studies of DC electrical systems and low-voltage systems for hydroelectric power plant projects.
He/She is involved from the needs analysis phase through to support for erection and commissioning, ensuring the technical, contractual, and regulatory compliance of the developed solutions.
Profile :
We are looking for an engineer with solid experience in DC electrical system studies.
Additional experience in installation, erection, and/or site commissioning would be a strong asset.
Essential Responsibilities:
Carry out the design studies for DC and low-voltage electrical systems, taking into account project needs and contractual requirements
Prepare technical specifications for equipment and sub-assemblies
Participate in technical and follow-up meetings with end customers, remotely and/or on site
Perform or supervise detailed engineering studies, including:
single-line diagrams
electrical schematics
bills of materials
technical data sheets
calculation notes
interconnection lists
cable lists
Ensure proper integration of equipment and systems into the overall installation
Manage outsourced detailed engineering studies when applicable and ensure their technical compliance
Analyze supplier offers and contribute to technical selection decisions
Ensure technical follow-up with suppliers and verify that the manufactured equipment complies with the purchase specifications
Manage interfaces between systems and equipment
Participate in hardware and software validation of equipment
Provide technical support to teams in charge of erection, installation, and site commissioning
Update technical documentation and as-built files
Qualifications / Experiences:
Master’s degree (Bac+5) in electrical engineering, electrotechnics, electronics, or equivalent field
Significant experience in electrical engineering design for DC systems and Low Voltage systems, ideally 5 to 10 years, with strong expertise in DC systems (batteries, DC distribution, associated systems)
Good experience of electrical engineering studies, including:
technical specification writing
single-line diagrams
electrical schematics
interconnection lists
cable lists
equipment definition
Experience in tools such as AutoCAD, EPlan, ETAP, and electrical calculation tools
Good knowledge of IEC, IEEE, ANSI standards, as well as applicable regulatory requirements
Experience in site installation, erection, or commissioning would be highly valued
Behavioural skills / competencies:
Rigorous approach
Strong organizational skills, especially in complex technical environments
Ability to define action plans and manage priorities
Team spirit
Comfortable working in multicultural and international environments
Proactive mindset
Willingness to travel for business purposes
Languages :
Fluent English is mandatory and french
Another language would be a plus (Spanish, German)
Position open to people with disabilities
Additional Information
Relocation Assistance Provided: No
Related keywords
eBoPElectrical Balance of PlantHydroelectric Power PlantDC DistributionBatteriesLow VoltageElectrical EngineeringTechnical Data SheetsCalculation NotesInterconnection ListsCable ListsHardware ValidationSoftware ValidationAs-built DocumentationIECIEEE
GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world.
It is made up of three businesses -- Power, Electrification, and Wind -- with focus on accelerating the path to more reliable, affordable, and sustainable energy, while helping our customers power economies and deliver the electricity that is vital to health, safety, security, and improved quality of life.
The world needs more energy, smarter energy. With energy demand expected to grow by more than 50% in the next 20 years, we are continuously innovating to meet the moment…like we have for the past 130 years. The Energy of Change and relentless optimism are what drive us – it’s about never giving up and seeing what’s possible so that we deliver the energy technologies the world needs right now and for generations to come.
GE Vernova’s attitude and edge is embedded in its name. We retain our treasured legacy, “GE,” as an enduring and hard-earned badge of quality and ingenuity. “Ver” / “verde” signal Earth’s verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver.
Together, we have the energy to change the world.
Offices: 58 Charles St, Boston, Massachusetts 02141, US
Energy ManagementSustainabilityEnergy StorageEnergyWind EnergyEnergy Efficiency
How many Manufacturing jobs are open in Grenoble, France right now?
There are currently 128 open manufacturing positions in Grenoble, France listed on Clera. New openings are added daily as companies post roles.
Which companies are hiring for Manufacturing roles in Grenoble, France?
Companies currently hiring include STMicroelectronics, Umicore, Caterpillar Inc., fortil, Teledyne Technologies Incorporated, among others. Browse the listings above to see every active employer.
Are there remote or hybrid Manufacturing jobs in Grenoble, France?
Yes — 16 of the 128 open manufacturing positions offer remote or hybrid work (0 remote, 16 hybrid).
How do I apply for Manufacturing jobs in Grenoble, France?
Each listing links directly to the employer's application page. Apply early — fresh listings get the most recruiter attention in the first two weeks.