Burnsville, Minnesota, United States · On-site
Date Posted: 2026-06-18 Country: United States of America Location: US-MN-BURNSVILLE-WEST ~ 14300 Judicial Rd ~ WEST BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job…
Skills: Mechanical Assembly, Blueprint Reading, Soldering, Welding, Quality Inspection
Tucson, Arizona, United States · Hybrid
$87k–$165k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-AZ-TUCSON-810 ~ 1151 E Hermans Rd ~ BLDG 810 (External Site) Position Role Type: Hybrid U.S. Citizen, U.S. Person, or Immigration Status Requirements…
Skills: Cost Control Analysis, Financial Analysis, SAP APEX, SAP PRISM, SAP BW
East Hartford, Connecticut, United States · On-site
$108k–$205k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-CT-EAST HARTFORD-ENG ~ 400 Main St ~ BLDG ENG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizens…
Skills: Logistics, Engineering, Fleet Management, ERP, MRP
Westford, Massachusetts, United States · On-site
$69k–$131k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-MA-WESTFORD-WFD7 ~ 7 Technology Park Dr ~ BLDG 7 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The abilit…
Skills: Technical Reading, Mechanical Blueprints, Electrical Schematics, Functional Testing, System Calibration
Lawton, Oklahoma, United States · On-site
$69k–$131k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-OK-LAWTON-711 ~ 1 Sw 11Th St ~ BLDG 111, Ste 290 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and…
Skills: Instructional Design, Technical Writing, Curriculum Development, Patriot Communications, Air Defense Systems
Andover, Massachusetts, United States · On-site
$69k–$131k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-MA-ANDOVER-AN3 ~ 354 Lowell St ~ AN3 SUFFOLK BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active an…
Skills: Project Management, Process Improvement, CORE Principles, Cross-functional Collaboration, Facility Planning
Clovis, California, United States · Remote OK
$87k–$165k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-MA-REMOTE Position Role Type: Remote U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. governm…
Skills: Mechanical Component Engineering, Interconnect Devices, Fasteners, Component Selection, Screening
Andover, Massachusetts, United States · On-site
$69k–$131k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-MA-ANDOVER-AR2 ~ 362 Lowell St ~ AR2 PLYMOUTH BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. cit…
Skills: Equipment Maintenance, Troubleshooting, Electrical Systems, Electro-mechanical Systems, Gas Systems
Waco, Ohio, United States · On-site
Date Posted: 2026-06-18 Country: United States of America Location: US-OH-TROY-101 ~ 101 Waco St ~ WACO Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is requir…
Skills: CNC Machining, Blueprint Reading, Tooling And Fixturing, Deburring, SPC/PCL Charting
Columbus, Georgia, United States · On-site
Date Posted: 2026-06-18 Country: United States of America Location: US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizen…
Skills: Precision Measurement, Engine Inspection, Technical Documentation, SAP, Configuration Management
Jupiter, Florida, United States · On-site
Date Posted: 2026-06-18 Country: United States of America Location: US-FL-JUPITER-HSMC ~ 17900 Beeline Hwy ~ HSMC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to o…
Skills: Coating Application, Laser Drilling, Masking, Grit Blasting, Precision Metrology
Cedar Rapids, Iowa, United States · On-site
$57k–$109k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-IA-CEDAR RAPIDS-137 ~ 855 35Th St NE ~ BLDG 137 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability…
Skills: Requirements Capture, System Design, Integration, Verification and Validation, Functional Analysis
Andover, Massachusetts, United States · Hybrid
$87k–$165k/yr
Date Posted: 2026-06-18 Country: United States of America Location: US-MA-ANDOVER-AN1 ~ 350 Lowell St ~ AN1 ESSEX BLDG Position Role Type: Hybrid U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citize…
Skills: Proposal Development, Costing Models, Production Analysis, Operations Analysis, Project Management
Wrocław, Lower Silesian Voivodeship, Poland · On-site
$5k–$9k/mo
Date Posted: 2026-06-10 Country: Poland Location: PL-24-WROCLAW-011 ~ Bierutowska St 60-65 ~ BLDG 11 Position Role Type: Onsite Dołącz do nas i rozwijaj swoją karierę w jednym z najbardziej dynamicznych obszarów inżynier…
Skills: Manual measurement, Technical drawing reading, SAP, CMM machine operation, Quality control
Wrocław, Lower Silesian Voivodeship, Poland · On-site
$5k–$9k/mo
Date Posted: 2026-06-15 Country: Poland Location: PL-24-WROCLAW-011 ~ Bierutowska St 60-65 ~ BLDG 11 Position Role Type: Onsite Dołącz do nas i rozwijaj swoją karierę w jednym z najbardziej dynamicznych obszarów inżynier…
Skills: Manual measurement, Technical drawing reading, SAP, CMM operation, Quality control
Bengaluru, Karnataka, India · Hybrid
Date Posted: 2026-06-18 Country: India Location: IN-KA-BENGALURU-NORTHGATE ~ Sy No 2/2 Venkatala Village ~ SY NO 2/2 VENKATALA VILLAGE, Yelahanka Hobli Position Role Type: Hybrid At RTX, the world's largest aerospace and…
Skills: Material Planning, SAP, Supply Chain Management, Inventory Strategy, Procurement Principles
Metropolitan Borough of Solihull, England, United Kingdom · Hybrid
Date Posted: 2026-06-18 Country: United Kingdom Location: Solihull, Solihull Position Role Type: Unspecified At RTX, the world's largest aerospace and defence company, 185,000 great minds are united by purpose and inspir…
Skills: Payroll Administration, SAP, Workday, ServiceNow, Data Analysis
Singapore · On-site
Date Posted: 2026-06-18 Country: Singapore Location: SG-01-SINGAPORE-061 ~ 61 Seletar Aerospace View ~ SELETAR BLDG 61, Pratt & Whitney Singapore Component Repair Position Role Type: Onsite Pratt & Whitney, an RTX busine…
Skills: CNC Machining, Lathe Machining, Grinding, Milling, EDM
Columbus, Georgia, United States · On-site
Date Posted: 2026-06-18 Country: United States of America Location: US-GA-MIDLAND-MPC ~ 8801/8987 Macon Rd ~ BLDG MPC Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizen…
Skills: Surface Preparation, Industrial Coating, Masking, Grit Blasting, Coating Inspection
Bengaluru, Karnataka, India · Hybrid
Date Posted: 2026-06-18 Country: India Location: IN-KA-BENGALURU-NORTHGATE ~ Sy No 2/2 Venkatala Village ~ SY NO 2/2 VENKATALA VILLAGE, Yelahanka Hobli Position Role Type: Hybrid At RTX, the world's largest aerospace and…
Skills: Chemical Regulatory Compliance, REACH, RoHS, Material of Concern Assessment, SAP EHSM
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
Responsible for assembling parts according to blueprint specifications and performing quality inspections to ensure defect-free products. Tasks include using specialized assembly equipment, recording test results, and maintaining a clean work area.
Requires a High School Diploma or GED and U.S. Person status. Manufacturing experience and a Career Readiness Certification are strongly preferred.
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62WEEKEND SHIFT: Saturday and Sunday 6:00am - 6:30pm
Responsible for quality product standards with no defects.
Meet customer deadlines and expectations.
Responsible to comply with applicable elements of quality systems.
Participate in cost reduction plans and continuous improvement plans/events, as required.
Participate in audits.
Acquire applicable skill/knowledge/certifications as required.
Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
Record test results in testing log. Route products for rework or salvage of usable parts.
Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
May fabricate instrument parts through crimping, staking, and cutting.
Acquire applicable skill/knowledge/certifications as required.
Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
Maintain materials, equipment, and work area in a clean and orderly condition.
Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
Check work methods and results for conformance to standards and re-instruct as required.
Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
Other duties as assigned.
Typically requires a HS Diploma or GED.
Must be a U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62
Manufacturing experience is strongly preferred
Career Readiness Certification (CRC) strongly preferred.
The ability to interpret schematics and/or technical drawings.
The ability to successfully complete training modules associated with job grade.
The ability to follow assembly instruction.
The ability to effectively work in an environment requiring repetitive job responsibilities.
The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
The ability to understand end uses of products being built.
Strong written and verbal communication skills.
Attention to detail to ensure safety and quality.
Strong organizational skills and ability to multi-task.
The ability to work in a team to support work capacity in a fast-paced environment.
Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
Demonstrated analytical skills and problem-solving abilities.
The ability to take direction from more experienced coworkers, leads and supervisors.
Some of our competitive benefits package includes:
Medical, dental, and vision insurance
Three weeks of vacation for newly hired employees
Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
Employee Scholar Program, tuition reimbursement program
Life insurance and disability coverage
Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
Ovia Health, fertility and family planning
Employee Assistance Plan, including up to 5 free counseling sessions
Incentives for a Healthy You
Bright Horizons, back-up child / elder care and college coach resources
Autism Benefit
Doctor on Demand, virtual doctor visits
Adoption Assistance
Teladoc Medical Experts, second opinion program
And more!
Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market.
Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world – and access to Collins sites when their work requires in-person meetings.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that’s redefining aerospace, every day.
The starting rate of pay for this role is $21.75/hour (includes shift differential pay); however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Click on this link to read the Policy and Terms
RTX is comprised of three market-leading businesses – Collins Aerospace, Pratt & Whitney and Raytheon – working as one to answer the biggest questions and solve the hardest problems in aerospace and defense.
Offices: Arlington, VA, US
RTX is comprised of three market-leading businesses – Collins Aerospace, Pratt & Whitney and Raytheon – working as one to answer the biggest questions and solve the hardest problems in aerospace and defense.
Offices: Arlington, VA, US
