Markham, Ontario, Canada · On-site
$27/hr–$30/hr
Who we are: Multimatic Inc. is a world-class company that has experienced tremendous growth since its inception. This growth was achieved due to the skill and dedication of the employees. MAMT is an industry-leading engi…
Skills: Mechanical Troubleshooting, Hydraulic Systems, Pneumatic Systems, Electrical Troubleshooting, Preventative Maintenance
Butler, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Feasibility study, estimate, quote, evaluate, specify and purchase capital equipment and tooling for new programs or modifications to existing programs to budget.Interact and direct …
Skills: Feasibility Study, Capital Equipment Procurement, Root Cause Analysis, GD&T, Tolerance Stack Ups
Butler, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Feasibility study, estimate, quote, evaluate, specify and purchase capital equipment and tooling for new programs or modifications to existing programs to budget.Interact and direct …
Skills: Hot Forming, CAD Drawing, Root Cause Analysis, GD&T, Tolerance Stack Ups
Butler, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Responsible for all aspects of program management, for specific programs, as outline by the General Manager or designated person, up to and including prototypes, pre-production sampl…
Skills: Program Management, Automotive Manufacturing, Tool and Die Design, Project Scheduling, Cost Analysis
Butler, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Leads the project management process inclusive of equipment planning, design, development and testing, and rate verification to support release of new products and product enhancemen…
Skills: Project Management, Equipment Planning, GD&T, Tolerance Stack Ups, SPC
Fort Wayne, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Liaise with customers and coordinate with staff and internal departments to effectively meet PPAP requirements for the introduction of new products, and subsequent revisions of engin…
Skills: PPAP, GD&T, CMM, ISO9001, IATF 16949
Thetford, England, United Kingdom · On-site
ESSENTIAL DUTIES & RESPONSIBILITIES: Adhere to health and safety protocols by maintaining a safe working environment, using appropriate PPE, and following established procedures for equipment operation and maintenance as…
Skills: Mechanical Assembly, Hydraulic Assembly, Dyno Testing, Fault Identification, Quality Assurance
East Gwillimbury, Ontario, Canada · On-site
$17/hr–$25/hr
Key Responsibilities: Collaborating with stakeholders to identify and document software application requirements. Designing application architecture, considering scalability, performance, and security aspects. Writing cl…
Skills: Java, Python, C#, JavaScript, OPC UA
Canada · On-site
$58k–$107k/yr
OVERVIEW Multimatic is a privately held global enterprise supplying engineered components, systems and services to the automotive industry. The company’s core competencies include the development and manufacture of compl…
Skills: LAN/WAN Design, Network Security, Cisco IOS Switching, Fortinet Firewalls, Microsoft Azure Cloud Networking
East Gwillimbury, Ontario, Canada · On-site
$17/hr–$25/hr
Key Responsibilities: Assist in solving maintenance related problems with minimum interruption to production.Perform all maintenance and repair work in either the plant or grounds as assigned.Ensure all weld quality spec…
Skills: Pneumatic Systems, Hydraulic Systems, Mechanical Systems, Electrical Systems, GMAW Welding
Butler, Indiana, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Assure the cleanliness and upkeep of the forklifts they operate.Completes daily work order activity to assure lift is in good condition and notes issues appropriately if detected.Loa…
Skills: Forklift Operation, Material Handling, Inventory Control, FIFO Auditing, Warehouse Management
Thetford, England, United Kingdom · On-site
The Role We are seeking a talented and motivated Suspension Design Engineer to join our growing team at the Multimatic Technical Centre Europe (MTCE). You will play a hands-on role in the design, development, and validat…
Skills: Siemens NX, CAD, GD&T, DFMEA, PFMEA
Fort Wayne, Indiana, United States · On-site
THIS IS A SECOND (2nd) SHIFT POSITION SUMMARY Maintains all equipment and facilities. Performing all PM checks and procedures as scheduled. Assist with set up and change over’s. ESSENTIAL DUTIES AND RESPONSIBILITIES Must…
Skills: Machine Diagnostics, Troubleshooting, Welding, Fabrication, Preventative Maintenance
East Gwillimbury, Ontario, Canada · On-site
$21/hr–$30/hr
Key Responsibilities: Operation of drilling, riveting, staking, tapping, welding, and other production machinery either automatic or manually operated as assigned.Use of checking fixtures and measuring and gauging equipm…
Skills: Machinery Operation, Quality Inspection, Measuring and Gauging, Inventory Recording, Equipment Maintenance
Canada · On-site
$58k–$107k/yr
Overview Multimatic is a privately held global enterprise supplying engineered components, systems and services to the automotive industry. The company’s core competencies include the development and manufacture of compl…
Skills: SAP S/4HANA, SAP Analytics Cloud, Data Governance, Financial Reporting, SAP Joule
Markham, Ontario, Canada · On-site
$58k–$107k/yr
About MTC Located in Markham, Ontario, Canada, Multimatic Technical Centre (MTC) is part of Multimatic’s Engineering Group. MTC provides advanced design, simulation, and testing to Multimatic’s production divisions, Orig…
Skills: Automotive Testing, Data Acquisition (DAQ), Test Fixture Design, Data Analysis, Signal Processing
Jackson, Michigan, United States · On-site
Direct supervision/management of all maintenance personnel. This includes supervisory of hourly employees.Assist maintenance personnel in solving maintenance related problems and/or new projects, with minimum interruptio…
Skills: Personnel Management, Preventative Maintenance, Budgeting, Equipment Analysis, Health and Safety Compliance
Kunshan, Jiangsu, China · On-site
1. According to the MO, change the package of the material and ship to the assembly line. 根据工单准备物料，更换包装并运送至组装线。 2. Packaging the finished good and place them in right shelves according to different customers, completes t…
Skills: Forklift Operation, Inventory Management, FIFO Management, Packaging, Material Handling
Newmarket, Ontario, Canada · On-site
$47k–$87k/yr
Company Overview: Multimatic Niche Vehicles North America (MNVNA) is the exclusive production facility of the Ford Mustang GTD. Previous assembly programs have been Ford GT, GT Mk II, GT Mk IV supercars and the Ford Bron…
Skills: Supplier Sourcing, Commercial Negotiations, Cost Reduction, Supplier Performance Management, RFQ Management
Lewisburg, Tennessee, United States · On-site
ESSENTIAL DUTIES AND RESPONSIBILITIES Provide input and direction in the sourcing, design, construction, PPAP and Launch of new tools, fixtures and equipment for future programs and current changes.Assist Tool-Room perso…
Skills: Tooling Design, PPAP, CAD, CMM, Poka Yoke
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
Responsible for the maintenance, troubleshooting, and repair of all facility equipment and production systems to minimize downtime. This includes performing preventative maintenance on machinery such as autoclaves and CNC equipment while adhering to safety and quality standards.
Requires 2 to 5 years of industrial maintenance experience with proficiency in mechanical, electrical, hydraulic, and pneumatic systems. Candidates must be able to lift 50lbs and be familiar with QS-9000 procedures.
Who we are:
Multimatic Inc. is a world-class company that has experienced tremendous growth since its inception. This growth was achieved due to the skill and dedication of the employees. MAMT is an industry-leading engineering development center that relies on its highly talented staff, following the company’s established systems and best practices, to maintain its position. It is important, in this dynamic environment, that everyone keep abreast of leading-edge technologies and techniques relating generally to MAMT’s core competencies and specifically to the assigned job function.
Scope of the position:
This position is responsible for maintenance, troubleshooting and repair of all facility equipment and systems. The role ensures that all maintenance activities are performed efficiently, minimizing production downtime and ensuring operational uptime. The position requires hands-on technical skills in mechanical, hydraulic, pneumatic, and electrical systems. Additionally, the ideal candidate will embody a proactive approach to preventive maintenance and continuous improvement. The role emphasizes safety, organization, and adherence to established best practices.
This job posting is for an existing vacancy. The total cash compensation range for this position is expected to be:
$0.00 - $0.00To learn more about Multimatic, check out our youtube channel - https://www.youtube.com/watch?v=psOjJIh3t90
If you are interested in this position, apply by sending us your cover letter and resume.
We thank all interested candidates in advance; however, only individuals selected for interviews will be contacted.
As part of our commitment to ensuring our employment practices are fair, accessible, and inclusive of persons with disabilities, recruitment-related accommodations for disabilities, are available upon request throughout the recruitment and assessment process for applicants with disabilities.
Multimatic is a privately held global enterprise supplying components, systems and engineering services to the automotive industry. Headquartered near Toronto, Canada, Multimatic has manufacturing divisions and engineering facilities in North America, Europe and Asia as well as alliance relationships with partners around the world. Multimatic is comprised of four operating groups: Multimatic Technologies, Multimatic Mechanisms, Multimatic Structures & Suspension, and Multimatic Niche Vehicles. Some job openings are posted through LinkedIn. All available job opportunities are posted at careers.multimatic.com.
Offices: Markham, Ontario, CA
Multimatic is a privately held global enterprise supplying components, systems and engineering services to the automotive industry. Headquartered near Toronto, Canada, Multimatic has manufacturing divisions and engineering facilities in North America, Europe and Asia as well as alliance relationships with partners around the world. Multimatic is comprised of four operating groups: Multimatic Technologies, Multimatic Mechanisms, Multimatic Structures & Suspension, and Multimatic Niche Vehicles. Some job openings are posted through LinkedIn. All available job opportunities are posted at careers.multimatic.com.
Offices: Markham, Ontario, CA
