Jobs at Mixer Systems, Inc. (Now Hiring) — 3 open

Description

Position Summary:

The Welder is an experienced MIG and metal core structural welder responsible for laying out, fitting, aligning, welding, and fabricating large, heavy, and complex structural assemblies, components, and weldments. This position works to close tolerances and exact specifications and requires broad knowledge of fitting, fabricating, and welding procedures.

The Welder works from drawings, blueprints, bills of materials, and specifications to plan and complete assemblies. Work is performed with minimal supervision and must meet established quality standards, customer requirements, and specifications.

Responsibilities and Tasks:

• Perform MIG welding in accordance with applicable drawings, specifications, and quality requirements. 
• Weld and fabricate carbon steel and, on occasion, stainless steel in various material thicknesses, including sections up to approximately 2–3 inches thick.
• Read blueprints and drawings and take or read measurements to plan layout and procedures.
• Determine the appropriate welding equipment or method based on requirements.
• Set up components for welding according to specifications (e.g., cut material with powered saws to match measurements).
• Operate angle grinders to prepare the parts that must be welded.
• Align components using rulers and clamp pieces.
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead).
• Repair machinery and other components by welding pieces and filling gaps.
• Test and inspect welded surfaces and structure to discover flaws.
• Maintain equipment in a condition that does not compromise safety.
• All other duties as assigned.
• Follow safety guidelines as set by the company.

Requirements

Qualifications

• Three to five years of MIG welding experience. 
• Experience welding carbon steel in various thicknesses.
• Experience using a variety of welding equipment and procedures.
• Experience in using electrical or manual tools (saws, air tools, squares, etc.).
• Ability and willingness to learn to safely operate overhead cranes, forklifts, rigging equipment, and other material-handling and lifting equipment. 
• Ability to read, write, speak, and understand English sufficiently to interpret work instructions, drawings, safety information, and technical documentation and to communicate effectively in the workplace. 
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves, steel-toed shoes, jacket, sleeves, etc.).
• Deftness and attention to detail.
• Regular attendance and active participation with the team is required.
• Ability to maintain reliable transportation to and from the assigned work location and report to work as scheduled.
• Stainless steel welding experience a plus.
• Professional Certification (e.g., an AWS welding certificate) or school credits in welding a plus.

Work Environment

The work environment characteristics described below are representative of those encountered while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Work is primarily performed in a manufacturing and fabrication environment. 
• Regular exposure to welding fumes, sparks, dust, noise, moving mechanical equipment, and varying temperatures. 
• Work may be performed near forklifts, overhead cranes, power tools, welding equipment, and large or heavy materials. 
• Required personal protective equipment must be worn in accordance with Company policy and applicable safety requirements. 
• The position may require overtime or schedule adjustments based on production needs.

Physical Demands

The physical demands described below are representative of those required to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Stand and walk for extended periods throughout the workday. 
• Frequently use hands and arms to handle materials, operate welding equipment, and use hand and power tools. 
• Frequently bend, stoop, kneel, crouch, twist, climb, and reach. 
• Lift, carry, push, and pull materials weighing up to 50 pounds independently and use appropriate assistance or material-handling equipment for heavier items. 
• Safely maneuver around large weldments, equipment, and congested production areas. 
• Maintain sufficient visual acuity to read drawings, take measurements, inspect welds, identify defects, and verify compliance with specifications. 
• Communicate effectively with coworkers, supervisors, and other departments. 
• Wear required personal protective equipment for extended periods. 

Mental Demands

• Read, interpret, and apply detailed drawings, blueprints, bills of materials, and welding specifications. 
• Maintain attention to detail and accuracy while performing repetitive and complex welding and fabrication work. 
• Plan and sequence work to meet production schedules and quality requirements. 
• Identify fit-up, alignment, shrinkage, and distortion issues and make appropriate corrections. 
• Exercise sound judgment when selecting materials, determining bracing requirements, and operating equipment. 
• Maintain concentration while working around welding equipment, moving machinery, overhead loads, and other workplace hazards. 
• Adapt to changing priorities, production needs, and work assignments. 
• Work independently with minimal supervision while collaborating effectively with other production employees and departments. 

Why You’ll Love Working At Mixer Systems:
At Mixer Systems, you’ll join a collaborative and down-to-earth team that treats each other like family. We combine the stability of a long-standing, well-respected company with the energy of a team that values innovation, continuous improvement, and genuine connection. Enjoy competitive pay, great benefits, and the opportunity to grow your career in an environment where your contributions truly make an impact.

Apply today and be part of a company that’s been shaping concrete solutions for over 46 years!

Mixer Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Employment with Mixer Systems, Inc. is on an at-will basis. Nothing in this job posting or any related materials should be construed as a guarantee of employment for any specific duration.

Applicants must be authorized to work in the United States. Mixer Systems, Inc. participates in E-Verify to confirm employment eligibility.

Notice to Recruiters: Mixer Systems, Inc. does not accept unsolicited resumes from agencies. Submissions without a signed agreement will become the property of Mixer Systems, Inc., and no placement fees will be paid.