Roskilde, Region Zealand, Denmark · On-site
If you have competencies in electrical power engineering and in modelling of power converter technologies and you would like to use those competencies for modelling of converter based units like wind turbines, solar PV s…
Skills: Electrical power engineering, Power converter technology, Wind turbine modelling, Solar PV systems, Battery storage
Copenhagen, Capital, Denmark · On-site
The Section for Structures and Safety at DTU Civil and Mechanical Engineering Department is looking for an ambitious, motivated and skilled PhD student eager to dedicate three years to the diagnosis and prognosis of fati…
Skills: Structural dynamics, Finite element modelling, Fracture mechanics, Fatigue analysis, Python
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
Experience in tool building for digital methods, controversy mapping, computational social science. We are looking for an experienced technical manager to manage and develop the technical infrastructure of the Observator…
Skills: Technical management, Computational social science, Digital methods, Large language models, Natural language processing
Kongens Lyngby, Capital Region of Denmark, Denmark · Hybrid
DTU skal fra 1. januar have et helt nyt team klar til at yde studiestøtterådgivning til DTU’s studerende med behov for denne særlige støtteform. Har du kendskab til DTU, og har du passion for at være med til at opbygge o…
Skills: Student counseling, Special educational support, Case management, Psychological support, Neurological support
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
At the Danish Chips Competence Centre DkCCC, we are looking for a Chip Fabrication and Innovation Manager to be working on a unique combination of international network building and local entrepreneurship. The two main t…
Skills: Chip fabrication, Network building, Entrepreneurship, Semiconductor industry, Project management
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
At the Danish Chips Compentence Centre DkCCC we are looking for a senior business development manager with interest in developing: New business enablement activities for Danish chips companies Pilot-projects for general …
Skills: Business development, Strategic planning, Stakeholder management, Innovation management, Project management
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
We are seeking 1-2 highly motivated and talented postdoctoral researchers to join our team at DTU Physics and contribute to ScaleQ, a new project on scalable photonic quantum computing. ScaleQ will develop bulk and integ…
Skills: Quantum optics, Photonic integrated circuits, Squeezed light, Gaussian boson sampling, Interferometry
Copenhagen, Capital, Denmark · On-site
DTU Sustain er et af verdens førende institutter indenfor miljø- og resource-området. Vores forskere, studerende og teknikere beskæftiger sig med at udvikle ny viden og højteknologiske løsninger med henblik på at forebyg…
Skills: Laboratory analysis, Ecotoxicology, Chromatography, Metal analysis, Chemical analysis
Copenhagen, Capital, Denmark · On-site
If you are interested in advancing research at the intersection of digital payments, critical infrastructure, and financial organizations – and have a background in organization studies, social or economic anthropology, …
Skills: Organizational ethnography, Qualitative research methods, Organization studies, Economic anthropology, Economic sociology
Roskilde, Region Zealand, Denmark · On-site
We are seeking a highly motivated Research Assistant in the area of damage modeling of large-scale composite structures. Our research focuses on developing predictive numerical tools for structural integrity assessment o…
Skills: Finite element analysis, Composite materials, MATLAB, Python, Scientific programming
Copenhagen, Capital, Denmark · On-site
Are you passionate about using process engineering and sustainability assessment to advance low-carbon food and biomanufacturing? Join us at DTU BRIGHT and contribute to Europe ecosystem of research projects establishing…
Skills: Process engineering, Techno-economic assessment, Life cycle assessment, Python, Process modelling
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
DTU søger en strategisk og relationsstærk teamleder, der vil være med til at styrke universitetets samarbejde med virksomheder. Samarbejdet omfatter også klynge- og brancheorganisationer og offentlige aktører. Vi søger e…
Skills: Strategic leadership, Partnership development, Stakeholder management, Innovation management, Business development
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
Are you passionate about science and developing and applying machine learning (ML) methodology to study the immune system and associated autoimmune disease states and mechanisms? Then you may be the perfect candidate for…
Skills: Machine Learning, Bioinformatics, Python, R, Statistics
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
Er du vores nye laborantpraktikant og har du lyst til at arbejde i et spændende forskningsmiljø? Vi søger en laborantpraktikant til at være med på holdet i sektionen for Construction Materials & Durability på DTU Sustain…
Skills: Laboratory Analysis, ICP-OES, Ion Chromatography, XRD, Laser Diffractometry
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
Vil du være med til at sætte dit præg på et af Danmarks største og mest spændende campusområder og bidrage til den daglige drift og udvikling af DTU Lyngby Campus? DTU’s Campus Service Bygninger søger en dygtig og erfare…
Skills: Carpentry, Building Maintenance, Project Management, Tendering, Dalux
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
DTU Compute and the Pioneer Centre for AI are excited to offer a Postdoc position for a talented and motivated researcher to join our lab at DTU led by Theodora Kontogianni. Our research focuses on solving real-world cha…
Skills: 3D Perception, Spatial Understanding, Computer Vision, Machine Learning, Python
Ballerup, Capital Region of Denmark, Denmark · On-site
The Department of Engineering Technology (DTU Engineering Technology) at DTU invites applications for a full-time faculty position as an Associate Professor or a DTU Tenure Track Assistant Professor in Business Economics…
Skills: International Business, Strategic Management, Technological Change, Quantitative Research, Qualitative Research
Copenhagen, Capital, Denmark · On-site
DTU Nanolab offers a truly unique opportunity, we are seeking a Head of Thin Film Processing, a position that has not been open for more than 20 years. At DTU Nanolab we operate at the intersection of academia and indust…
Skills: Nanofabrication Management, Plasma Etching, Thin Film Deposition, Process Development, Leadership
Kongens Lyngby, Capital Region of Denmark, Denmark · On-site
Are you motivated to develop advanced modelling tools for the green transition of one of the world’s most CO₂-intensive industries? This PhD position offers an opportunity to work at the interface of computational fluid …
Skills: Computational Fluid Dynamics, System Analysis, Process Modelling, Life Cycle Assessment, Techno-Economic Assessment
Copenhagen, Capital, Denmark · On-site
These positions will play a key role in shaping the computational and experimental pillars of our closed-loop discovery platforms that integrates artificial intelligence, physics-based modelling, automated experimentatio…
Skills: Multiscale Materials Modelling, Robotic Synthesis, Artificial Intelligence, Machine Learning, Autonomous Experimentation
Roskilde, Region Zealand, Denmark • On-site
Sign up with Clera and we'll reach out the moment a role actually fits you — no more spraying applications into the void.
The candidate will develop and validate RMS and EMT simulation models for hybrid power plants combining wind, solar, and battery storage. Responsibilities also include participating in experimental testing at the Risø HPP facility and disseminating research findings through academic publications.
Applicants must hold an MSc degree in power systems engineering or a related field with a strong understanding of power converter technology. Proficiency in simulation tools such as PSCAD and PowerFactory is required, along with knowledge of relevant IEC standards.
If you have competencies in electrical power engineering and in modelling of power converter technologies and you would like to use those competencies for modelling of converter based units like wind turbines, solar PV systems and batteries in power systems, this PhD position is an opportunity for you.
The PhD will be performed in a university environment including an experimental research facility and industrial collaboration.
Responsibilities and qualifications
The driving purpose of this PhD is to develop and validate simulation models for grid connection of renewable Hybrid Power Plants (HPPs) combining wind turbines, PV systems and storage. DTUs experimental facility Risø HPP will be chosen as the scope of the modelling, and tests performed in Risø HPP will be used for validation of the simulation models in a real environment combining wind turbines, PV systems and battery storage. Grid operators request properly validated simulation models for converter based plants in order to permit grid connection for the plants.
You will work with a university team of academic researchers, engineers and technicians who will supervise your research and ensure that you will have access to test results from a real HPP environment.
Your primary tasks will be to
You should possess the following key competencies
You must have a two-year master's degree (120 ECTS points) or a similar degree with an academic level equivalent to a two-year master's degree.
Approval and Enrolment
The scholarship for the PhD degree is subject to academic approval, and the candidate will be enrolled in one of the general degree programmes at DTU. For information about our enrolment requirements and the general planning of the PhD study programme, please see DTU's rules for the PhD education.
Assessment
The assessment of the applicants will be made by supervisors Prof. Poul Sørensen and Associate Professor Kaushik Das, and hiring manager Head of Section Gregor Giebel.
We offer
DTU is a leading technical university globally recognized for the excellence of its research, education, innovation and scientific advice. We offer a rewarding and challenging job in an international environment. We strive for academic excellence in an environment characterized by collegial respect and academic freedom tempered by responsibility.
Salary and appointment terms
The appointment will be based on the collective agreement with the Danish Confederation of Professional Associations. The allowance will be agreed upon with the relevant union.
The period of employment is 3 years.
You can read more about career paths at DTU here.
Further information
Further information may be obtained from Prof. Poul Sørensen, email [email protected] or phone +45 2136 2766.
You can read more about DTU Wind at www.wind.dtu.dk.
If you are applying from abroad, you may find useful information on working in Denmark and at DTU at DTU – Moving to Denmark. Furthermore, you have the option of joining our monthly free seminar “PhD relocation to Denmark and startup “Zoom” seminar” for all questions regarding the practical matters of moving to Denmark and working as a PhD at DTU.
Application procedure
Your complete online application must be submitted no later than 23 August 2026 (23:59 Danish time). Applications must be submitted as one PDF file containing all materials to be given consideration. To apply, please open the link "Apply now", fill out the online application form, and attach all your materials in English in one PDF file. The file must include:
You may apply prior to obtaining your master's degree but cannot begin before having received it.
Applications received after the deadline will not be considered.
All interested candidates irrespective of age, gender, disability, race, religion or ethnic background are encouraged to apply. As DTU works with research in critical technology, which is subject to special rules for security and export control, open-source background checks may be conducted on qualified candidates for the position.
DTU Wind and Energy Systems is about taking the technology to the next level. About creating an impact for people and society through research and innovation. About collaborating with the entire energy sector to develop the most effective technology on the planet. DTU Wind and Energy Systems is organized in 4 divisions and 22 sections. The organizational set-up reflects the new role of wind power in the energy systems as well as the continued need for development of new wind turbine technology and materials and components research. We have more than 451 staff members of which 60% are researchers, 20 professors, 107 PhDs, 26% women, 48 nationalities.
DTU – For the benefit of society since 1829
DTU is one of Europe's leading elite technical universities. Through research and education at an international top level, we create solutions to the major societal challenges of our time and help secure Europe's global leadership in sustainable technological development. Since Hans Christian Ørsted founded DTU almost 200 years ago, our mission has remained the same: We develop and create value through the natural and technical sciences for the benefit of society. DTU has 13,800 students, 1,600 PhD students, and 6,500 employees. We work in an international environment and have an inclusive, stimulating, and informal work culture. DTU has campuses in all parts of Denmark and in Greenland and collaborates with the best universities around the world.
Mission & Vision DTU Nanolab is the National Centre for Nanofabrication and Characterization in Denmark. The center is an open access research infrastructure facility owned by and located at the Technical University of Denmark (DTU). The 100 staff members include engineers, technicians as well as professors and Ph.D. students. Link to staff Our Mission is threefold: • To push the boundaries of micro/nano fabrication and electron beam based characterization. •To provide Denmark with state-of-the-art infrastructure, technology and education within micro- and nanofabrication and nanocharacterization. •To enable Danish industry to exploit the existing and future benefits of nanotechnology. Open Access Pending proper training and instructions DTU Nanolab is open to all academic and commercial entities either through partnership or on a pay per use basis. We operate and maintain advanced processing equipment within 1350 m2 cleanroom facilities. Our suite of 9 advanced electron microscopes allows in-situ study of chemical reactions with atomic resolution as well as characterization of composition and nanocrystalline structure of materials. Broad Network Our customer base reaches from small start-up to multinational companies. We host users and collaborate with most of the Danish and a number of foreign universities. Concerning operation of the facility, user safety, tool access and booking systems as well as user training we have close exchange of best practice with our colleagues in the Nordic Countries (NTNU, Chalmers, ALTO,KTH) as well as other universities facilities such as MIT, Stanford, Tyndall Labs, University of Twente and the Australian National Fabrication Facility (ANFF).
Offices: Building 347, Lyngby, 2800, DK
Mission & Vision DTU Nanolab is the National Centre for Nanofabrication and Characterization in Denmark. The center is an open access research infrastructure facility owned by and located at the Technical University of Denmark (DTU). The 100 staff members include engineers, technicians as well as professors and Ph.D. students. Link to staff Our Mission is threefold: • To push the boundaries of micro/nano fabrication and electron beam based characterization. •To provide Denmark with state-of-the-art infrastructure, technology and education within micro- and nanofabrication and nanocharacterization. •To enable Danish industry to exploit the existing and future benefits of nanotechnology. Open Access Pending proper training and instructions DTU Nanolab is open to all academic and commercial entities either through partnership or on a pay per use basis. We operate and maintain advanced processing equipment within 1350 m2 cleanroom facilities. Our suite of 9 advanced electron microscopes allows in-situ study of chemical reactions with atomic resolution as well as characterization of composition and nanocrystalline structure of materials. Broad Network Our customer base reaches from small start-up to multinational companies. We host users and collaborate with most of the Danish and a number of foreign universities. Concerning operation of the facility, user safety, tool access and booking systems as well as user training we have close exchange of best practice with our colleagues in the Nordic Countries (NTNU, Chalmers, ALTO,KTH) as well as other universities facilities such as MIT, Stanford, Tyndall Labs, University of Twente and the Australian National Fabrication Facility (ANFF).
Offices: Building 347, Lyngby, 2800, DK
