Jobs at Allied Moulded Products, Inc (Now Hiring) — 2 open

Job DetailsJob Location: AMP - BRYAN , OH 43506Position Type: Full TimeEducation Level: High SchoolSalary Range: $22.30 - $23.40 HourlyTravel Percentage: NoneJob Shift: 2nd/3rd ShiftJob Category: ManufacturingPOSITION TITLE: Mixer Fiberglass

PAY GRADE: Non-Exempt / Grade 6

BUSINESS UNIT: Residential Business Unit 16-FiberglassBOX Molding REPORTS TO: Supervisor-Production

PURPOSE: An effective Mixer holds safety as a value. Demonstrates safe work practices in all they do and has no hesitation notifying anyone of an unsafe situation. The mixer will be responsible for preparing and mixing bulk molding compound (BMC) materials to precise specifications, ensuring high-quality output for production. This role requires adherence to safety standards, knowledge of raw materials, and mechanical equipment operation.

1.0 DUTIES / RESPONSIBILITIES:

Material Preparation

Weigh and measure raw materials such as polyester resin, glass fibers, fillers, and additives according to specified formulas.
Ensure all raw materials are stored and handled properly to maintain quality.

Mixing Operations

Communicate with the press room to determine production requirements for mixing schedule.
Operate and maintain mixing machine (e.g., manual mixer, mixer machine) to combine materials into a homogeneous mixture.
Monitor the mixing process to ensure proper consistency, viscosity, and quality standards are met. Complete quality checks as required.
Make adjustments to formulations as needed based on batch results or specifications. Contact supervisor for formulation issues.

Quality Assurance

Conduct visual and physical inspections of mixed materials for defects of inconsistencies.
Perform basic laboratory tests to verify material properties, such as density, cure time, and texture.
1st Shift Mixer will assist with the unloading of resin trucks. Will be the back up quality lab tester in the absence of Quality Technician 3 (lab tester).

Equipment Maintenance

Clean, inspect, and maintain mixing equipment to ensure continuous operation.
Perform Total Productive Maintenance (TPM) duties, as assigned. Those duties are best described as those tasks required to clean, inspect, and lubricate the equipment and work area. Refer to the work center specific work instructions for guidance. General characteristics of TPM Duties are as follows.

Take 5 Minutes or less
Require 2 tools or less
Are performed daily, weekly, or monthly
Are Identified in the OEM Manual as an Operations Requirement
Tasks that are generally accessible

Documentation

Maintain accurate records of material batches, formulations, and production output.
Report deviations from production plans and suggest corrective actions.
Maintains proper inventory rotation using the first-in/first-out inventory method.

Safety Compliance

Follow all workplace safety guidelines, including proper use of personal protective equipment (PPE).
Proper fit and wearing of a respirator required. To maintain a seal, facial hair needs to be removed.
Ensure safe handling of chemicals and raw materials in accordance with safety data sheets (SDS).
Obtain and maintain a forklift license for a stand up and sit down fork truck.

2.0 REQUIRED SKILL / ABILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Must be able to meet the physical demands of the job.
Must be able to work well with others and in a team atmosphere.
Strong attention to detail in a technical setting.
Must be flexible with work schedules and work overtime as required.
Must demonstrate a willingness to learn and be an active participant in training.
Ability to be multi-observant and prioritize issues.
Must possess good critical thinking and decision-making abilities.
Experience with injection and/or compression molding.
Ability to operate mobile equipment, cranes, power tools, and hoists.

3.0 EDUCATION / EXPERIENCE:

High School diploma or equivalent; additional technical training a plus.
Prefers three (3) years’ experience or combination of education and experience, preferably in a technical field or quality field.
Capable of growing knowledge and demonstrating competence in your job.
Familiarity with quality assurance standards and basic laboratory testing procedures.
Understanding of BMC materials, raw material properties, and their role in the formulation process.

4.0 MENTAL / VISUAL REQUIREMENT:

Ability to follow detailed instructions, technical specifications, and safety guidelines
Good general ability with use of computer touch screens and written documents.
Basic math skills, ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

5.0 PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The associate is frequently required to:

Stand, walk, stoop, kneel, climb, use hands to feel or handle objects, tools, or controls.
Reach and lift with hands and arms; talk, see and hear.
Ability to step onto and off the mixer platform numerous times during the shift.
Must be able to pass Pulmonary Function Test for respirator use and utilize several times during the shift as needed when mixing or removing material.
Capable of working in a production area, must be able to work in a tight, close environment when needed.
Capable of lifting and moving heavy materials (up to 50 pounds) as required.
Required to perform repetitive tasks.
The associate may need to be available for extended shift hours if needed and assist in emergency situations.
Duties, responsibilities, and activities may change at any time with or without notice, based on operational needs.

6.0 WORK ENVIRONMENT:

The environmental characteristics described here are representative of those an associate will encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate frequently works near moving parts. The associate may occasionally be exposed to fumes or airborne particles. Due to the open environment of the building, must be able to work in various temperatures. Involves moderate or occasional presence of unfavorable conditions, i.e., cold, dust, heat, noise, odor, chemicals, etc. Safety glasses, hearing protection, gloves, heat protective sleeves, and safety shoes may be required in the area that you are working in based on our safety PPE standards.

Allied Moulded Products is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identification, or any other characteristic protected by law.

Qualifications