Systems Engineer

Location
Chennai
Workplace
On-site
Employment
Full-time

About this role

Systems Engineer – Batteries & Electrical

Department: TEC Electrical & Battery

Experience Level: 3–5 Years

Location: Chennai, India

Position Type: Full-Time / New Role

About the Role

As a Systems Engineer within the Electrical & Battery Group, you will drive the systems-level development, requirement capture, and aircraft-level integration of our core energy storage and power conversion technologies. Instead of focusing on generic airframe wiring, you will own the systems engineering lifecycle for our high-voltage traction battery packs, Battery Management Systems (BMS HW/SW), high-voltage to low-voltage (HV/LV) DC-DC converters, and the Battery Thermal Management System (BTMS). You will act as the technical bridge ensuring these critical sub-systems seamlessly integrate, communicate, and achieve aerospace certification.

What You Will Do

  • Sub-System Integration: Define and own the interfaces, boundaries, and system behavior linking the physical Traction Battery Pack, BMS (Hardware & Software), HV/LV Converters, and BTMS to the wider eVTOL aircraft airframe.

  • Requirements Engineering: Capture, cascade, and track technical requirements from the aircraft level down to components, utilizing SAE ARP4754A guidelines to build out structured Verification Cross-Reference Matrices (VCRM).

  • Safety & Compliance Mapping: Coordinate functional safety assessments and hazard analyses (SAE ARP4761) specifically around battery thermal runaway, loss of BMS control, and converter power failures.

  • V&V Strategy: Design environmental and hardware verification plans targeting compliance with RTCA DO-160 and RTCA DO-254 for EWIS, Power distribution, Power conversion electronics and BMS & BTMS controllers.

  • Interface & Communication Control: Define and maintain data-bus communications (CAN, CAN-FD, or aerospace equivalents) and electrical grounding architectures to mitigate EMI/EMC issues between high-power traction lines and low-voltage control systems.

What We Are Looking For (Must-Haves)

  • Experience: 3 to 5 years of systems engineering or multidisciplinary design experience focused on high-voltage battery systems or electric powertrains (Aerospace or high-performance EV sectors preferred).

  • Education: Bachelor’s or Master's degree in Electrical Engineering, Aerospace Engineering, Electronics & Communication, or a closely related discipline.

  • Domain Expertise: Strong engineering comprehension of at least two of the following: BMS architecture, Lithium-ion battery thermal management, or high-power switching topologies (DC-DC converters/inverters).

  • Aerospace Standard Depth: Clear working knowledge and theoretical understanding of aerospace frameworks: RTCA DO-160, RTCA DO-254, SAE ARP4754A, and SAE ARP4761.

Preferred Skills (Good-to-Have)

  • Familiarity with battery-specific standards such as RTCA DO-311A, SAE ARP-7131 or SAE AIR-6464.

  • Experience using requirements management software (e.g., JIRA, Jama Connect, Polarion, Visure or DOORS).



Apply to The ePlane Company

Clera fills in The ePlane Company's application for you.

How it works

Open the role in Clera

Sign in, and this role opens on your Clera job board, ready to apply.

Clera fills in the application

Clera fills the form from your profile and resume, and asks what's missing.

Track it in Clera

Each application you send shows up in your Clera tracker, sorted by stage.

Want Clera to find roles for you?

Ask your AI about this role

It knows you. Clera gives it the role.

Does this role fit my profile?

First time? Connect Clera once, about a minute.
One click above pre-fills the connector. Or by hand: Settings > Connectors > Add custom connector, paste https://mcp.getclera.com. Either way, sign in with the account you use on Clera and approve the consent screen.
https://mcp.getclera.com

Sign in with your Clera account. MCP docs

About The ePlane Company

The ePlane Company is redefining urban air mobility with the e200X, India's first electric air ambulance and taxi. Engineered around a compact 8 by 10 meter footprint , it utilizes existing city helipads and rooftops instead of requiring entirely new infrastructure. As a deep-tech "Make in India" breakthrough, its core subsystems—including the propellers, airframe, landing gear, and battery packs are developed entirely indigenously.

Current Stage & Capital
Backed by $21 million in total funding, including a $14 million Series B , and 7 years of subscale validation, ePlane has transitioned from simulation to hardware. Full-scale assembly of the first prototype, PT-01, is complete, integrating all core subsystems into a single physical structure. PT-01 is entering ground testing at IIT Madras to validate structural loads , moving directly into flight testing and DGCA Type Certification. Notably, ePlane holds India's first Design Organisation Approval (DOA) for a private electric aircraft.

Leadership & Credibility
Incubated at IIT Madras and founded by Prof. Satya Chakravarthy , the company pairs top-tier aerospace expertise with capital-efficient engineering. Its deep-tech capability is validated globally, recently featured in NVIDIA CEO Jensen Huang's GTC Keynote and selected for the government's flagship Bharat Innovates 2026 showcase in France, inaugurated by Prime Minister Narendra Modi and President Emmanuel Macron.

The Future

The commercial rollout leads with the air ambulance to address the critical emergency "golden hour" , cutting urban transit times from hours to minutes. This same scalable airframe will later expand to serve passenger air taxi and urban cargo sectors , redefining city transit as a formal public unveil approaches in the coming weeks.

Team size
201-500 employees people
Founded
2019
Industry
Aviation and Aerospace Component Manufacturing
Workplace
On-site
Locations
Tiruporur, Tamil Nadu, India