Senior Firmware Engineer

Location
Chennai
Workplace
On-site
Employment
Full-time

About this role

Senior Firmware Engineer

Department: TEC Electrical & Battery

Experience Level: 6–9 Years

Location: Chennai, India

Position Type: Full-Time / New Role

About the Role

As a Senior Firmware Engineer, you will spearhead the development and verification of safety-critical embedded code powering our in-house electronic systems for advanced aerial mobility. In this role, you will lead core firmware development and verification entirely in-house. Your software will drive the closed-loop control, monitoring, and fault handling of our Battery Management Systems (BMS SW), Traction Battery Pack safety logic, HV/LV DC-DC converters, chargers, and Battery Thermal Management System (BTMS) controllers, ensuring all sub-systems communicate deterministically to support aircraft-level integration.

What You Will Do

  • Core Sub-System Control: Design, implement, and validate production-grade firmware in Embedded C/C++ across our core power architectures:

    • BMS & Pack Safety: Core algorithmic firmware for state-of-charge (SoC), state-of-health (SoH), active/passive cell balancing, fault detection, and high-voltage contactor coordination.

    • HV/LV Converters: Real-time, high-frequency digital control loops for voltage/current regulation, power electronics modulation, and protective switching thresholds.

    • BTMS Logic: Actuator control loops (PWM, digital outputs) for pumps, fans, and active cooling/heating elements based on predictive thermal models.

  • Driver & Bootloader Authoring: Develop low-level bare-metal drivers for microcontrollers (ARM Cortex-M or safety-rated cores), peripheral chips (SPI, I2C, ADC), and custom, secure bootloaders for field-upgradable firmware.

  • Advanced Troubleshooting & Hardware Debugging: Diagnose complex, intermittent, and timing-critical system issues during hardware bring-up and qualification using JTAG/SWD debuggers, logic analyzers, oscilloscopes, and bus analyzers.

  • Aviation Verification & Tooling: Drive structural coverage analysis, static analysis, and dynamic code testing using static/dynamic verification suites such as LDRA, Rapita Systems (RapiTest/RapiCover), or equivalent aerospace-grade verification tools.

  • Deterministic Communication: Implement communication protocol stacks (CAN, CAN-FD) to interface seamlessly with the aircraft-level flight control computer, ensuring predictable timing, low jitter, and bounded latency.

  • In-House Code Ownership: Establish rigorous coding standards (MISRA C/C++), architectural design patterns, software-in-the-loop (SIL) testing frameworks using Python, and automated test environments to scale internal development capabilities.

Cross-Functional & Stakeholder Collaboration

  • With Flight Controls & Systems Integration: Define communication data dictionaries, telemetry bandwidth limits, network diagnostic trouble codes (DTCs), and vehicle-level fail-safe handling modes to ensure the battery powertrain responds correctly to autopilot or pilot commands.

  • With Hardware Design Engineers: Partner during hardware bring-up and verification loops to isolate hardware vs. software issues, validate low-level registry settings, tune sensor calibration curves, and debug board-level signal integrity/timing constraints.

  • With Battery Systems & Thermal System Engineers: Translate physical electrochemical safety thresholds, charging curves, and cooling fluid flow requirements into algorithmic state machines and deterministic control code.

  • With V&V Testing Teams: Provide testable software builds equipped with diagnostic hooks, supporting the execution of automated Hardware-in-the-Loop (HIL) testing, safety fault injection testing, and aerospace compliance validation pipelines.

What We Are Looking For (Must-Haves)

  • Experience: 6 to 9 years of hands-on embedded software development and verification experience, specifically with high-reliability real-time control loops in aviation/aerospace electronics or high-voltage electrical power products (e.g., BMS, power converters, flight controls, or smart grid power distribution).

  • Language & Tool Mastery: Expert-level mastery of Embedded C/C++, Python scripting for automated testing/data parsing, and modern bare-metal microcontroller architectures (ARM Cortex-M or safety-rated dual-core MCUs).

  • Firmware Verification Tools: Hands-on experience authoring test suites, executing static analysis, and measuring code coverage (statement/branch/MC/DC) using tools such as LDRA Tool Suite, Rapita Systems, VectorCAST, or Parasoft.

  • Troubleshooting & Debugging Excellence: Exceptional skills in isolating complex firmware defects using JTAG/SWD, trace analyzers, logic analyzers, oscilloscopes, and CAN bus analyzers under live power conditions.

  • Safety Frameworks & Quality: Proven track record writing production code adhering to MISRA C/C++ rules and robust exception/fault-handling architectures.

  • Consultant Transition Leadership: Ability to dissect existing codebases, abstract requirements from external partners, write clean & maintainable code, and take absolute internal code ownership.

Preferred Skills (Good-to-Have)

  • Direct exposure to aerospace software compliance standards such as RTCA DO-178C / EUROCAE ED-12C (Design Assurance Level DAL B or C).

  • Experience with worst-case execution time (WCET) analysis and timing verification tools (e.g., RapiTime or AbsInt aiT).

  • Formal software testing or quality certifications (e.g., ISTQB Foundation/Advanced, INCOSE).



Apply to The ePlane Company

Clera fills in The ePlane Company's application for you.

How it works

Open the role in Clera

Sign in, and this role opens on your Clera job board, ready to apply.

Clera fills in the application

Clera fills the form from your profile and resume, and asks what's missing.

Track it in Clera

Each application you send shows up in your Clera tracker, sorted by stage.

Want Clera to find roles for you?

Ask your AI about this role

It knows you. Clera gives it the role.

Does this role fit my profile?

First time? Connect Clera once, about a minute.
One click above pre-fills the connector. Or by hand: Settings > Connectors > Add custom connector, paste https://mcp.getclera.com. Either way, sign in with the account you use on Clera and approve the consent screen.
https://mcp.getclera.com

Sign in with your Clera account. MCP docs

About The ePlane Company

The ePlane Company is redefining urban air mobility with the e200X, India's first electric air ambulance and taxi. Engineered around a compact 8 by 10 meter footprint , it utilizes existing city helipads and rooftops instead of requiring entirely new infrastructure. As a deep-tech "Make in India" breakthrough, its core subsystems—including the propellers, airframe, landing gear, and battery packs are developed entirely indigenously.

Current Stage & Capital
Backed by $21 million in total funding, including a $14 million Series B , and 7 years of subscale validation, ePlane has transitioned from simulation to hardware. Full-scale assembly of the first prototype, PT-01, is complete, integrating all core subsystems into a single physical structure. PT-01 is entering ground testing at IIT Madras to validate structural loads , moving directly into flight testing and DGCA Type Certification. Notably, ePlane holds India's first Design Organisation Approval (DOA) for a private electric aircraft.

Leadership & Credibility
Incubated at IIT Madras and founded by Prof. Satya Chakravarthy , the company pairs top-tier aerospace expertise with capital-efficient engineering. Its deep-tech capability is validated globally, recently featured in NVIDIA CEO Jensen Huang's GTC Keynote and selected for the government's flagship Bharat Innovates 2026 showcase in France, inaugurated by Prime Minister Narendra Modi and President Emmanuel Macron.

The Future

The commercial rollout leads with the air ambulance to address the critical emergency "golden hour" , cutting urban transit times from hours to minutes. This same scalable airframe will later expand to serve passenger air taxi and urban cargo sectors , redefining city transit as a formal public unveil approaches in the coming weeks.

Team size
201-500 employees people
Founded
2019
Industry
Aviation and Aerospace Component Manufacturing
Workplace
On-site
Locations
Tiruporur, Tamil Nadu, India