Power Electronics Design & Validation Engineer
- Location
- Chennai
- Workplace
- On-site
- Employment
- Full-time
About this role
- We are hiring a Power Electronics Design & Validation Engineer to lead the design, development, tuning, integration, and validation of high-voltage, high-power propulsion inverter systems for next-generation eVTOL platforms. The role involves end-to-end ownership of propulsion inverter hardware, motor control algorithms, system integration, controller tuning, verification & validation, and powertrain testing activities. You will work on 600–1000V class electric propulsion systems involving SiC-based inverters, high-speed electric motors, thermal management, EMI/EMC, functional safety, and aircraft-level powertrain integration. The ideal candidate should have strong expertise in power electronics design, motor control, system-level validation, and hardware/software integration for aerospace or high-performance EV applications.
Key Responsibilities - Lead the architecture, design, development, and validation of high-voltage propulsion inverter systems for eVTOL applications.
- Design and optimize high-power inverter hardware including DC-link capacitors, gate drivers, busbars, current sensing, protection circuits, and SiC/MOSFET power stages.
- Develop motor control strategies including FOC, MTPA, field weakening, torque control, regenerative braking, and fault management.
- Perform controller tuning and calibration for propulsion motors under dynamic flight operating conditions.
- Conduct simulation and modelling activities using MATLAB/Simulink, PLECS, LTspice, PSIM, or similar tools for inverter and motor drive systems.
- Define and execute verification & validation plans for propulsion inverters, motor controllers, and integrated electric powertrain systems.
- Support HIL, SIL, MIL, and dyno-based testing activities for propulsion systems and perform correlation between simulation and experimental results.
- Lead system integration activities involving motors, batteries, BMS, thermal systems, avionics interfaces, and aircraft power distribution systems.
- Develop and validate fault detection, diagnostics, derating logic, redundancy management, and fail-safe operation strategies.
- Perform EMI/EMC analysis, grounding strategy development, and high-voltage insulation coordination.
- Collaborate cross-functionally with mechanical, thermal, controls, embedded software, systems engineering, and certification teams.
- Support compliance activities for aerospace standards including DO-160, DO-254, DO-178C, ARP4754A, and functional safety requirements.
- Generate technical documentation including design reports, test procedures, DVPRs, qualification reports, and certification artifacts.
- Support prototype bring-up, debugging, troubleshooting, and root-cause analysis during development and testing phases.
Requirements
- Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, Aerospace Engineering, Mechatronics, or related field.
- 5+ years of industry experience in high-voltage power electronics, electric propulsion, or motor drive system development.
- Strong experience in designing high-power inverters using SiC MOSFETs or IGBTs for automotive, aerospace, or industrial applications.
- Proficiency in motor control development and tuning including FOC, torque control, and field weakening algorithms.
- Hands-on experience with MATLAB/Simulink, PLECS, LTspice, PSIM, or equivalent simulation environments.
- Experience in controller validation, dyno testing, system debugging, and propulsion system integration.
- Strong understanding of HV safety, thermal management, EMC/EMI mitigation, and electrical protection strategies.
- Knowledge of embedded systems, real-time control implementation, CAN communication, and data acquisition systems.
- Experience in verification & validation methodologies including SIL, HIL, MIL, and hardware testing.
- Familiarity with aerospace certification and development processes for safety-critical systems.
- Experience with eVTOL, UAV, aerospace propulsion, or electric aircraft systems.
- Knowledge of DO-160, DO-254, DO-178C, ARP4761, and aerospace functional safety workflows.
- Experience with high-speed electric motors, resolver/encoder interfaces, and propulsion gearbox systems.
- Exposure to battery systems, HV distribution architectures, and aircraft energy management systems.
- Hands-on experience with HIL platforms such as dSPACE, Speedgoat, Typhoon HIL, or NI systems.
- Experience with thermal design and cooling integration for high-power propulsion inverters.
- Familiarity with PCB layout constraints for high-current/high-voltage applications and low inductance busbar design.
- Knowledge of test instrumentation including oscilloscopes, power analyzers, thermal cameras, and EMI/EMC test setups.
- Experience working in cross-functional teams involving systems engineering, certification, and flight test teams.
- Strong analytical, troubleshooting, and technical documentation skills.
Apply to The ePlane Company
Clera fills in The ePlane Company's application for you.
How it works
Open the role in Clera
Sign in, and this role opens on your Clera job board, ready to apply.
Clera fills in the application
Clera fills the form from your profile and resume, and asks what's missing.
Track it in Clera
Each application you send shows up in your Clera tracker, sorted by stage.
Ask your AI about this role
It knows you. Clera gives it the role.
First time? Connect Clera once, about a minute.
https://mcp.getclera.comSign in with your Clera account. MCP docs
About The ePlane Company
The ePlane Company is redefining urban air mobility with the e200X, India's first electric air ambulance and taxi. Engineered around a compact 8 by 10 meter footprint , it utilizes existing city helipads and rooftops instead of requiring entirely new infrastructure. As a deep-tech "Make in India" breakthrough, its core subsystems—including the propellers, airframe, landing gear, and battery packs are developed entirely indigenously.
Current Stage & Capital
Backed by $21 million in total funding, including a $14 million Series B , and 7 years of subscale validation, ePlane has transitioned from simulation to hardware. Full-scale assembly of the first prototype, PT-01, is complete, integrating all core subsystems into a single physical structure. PT-01 is entering ground testing at IIT Madras to validate structural loads , moving directly into flight testing and DGCA Type Certification. Notably, ePlane holds India's first Design Organisation Approval (DOA) for a private electric aircraft.
Leadership & Credibility
Incubated at IIT Madras and founded by Prof. Satya Chakravarthy , the company pairs top-tier aerospace expertise with capital-efficient engineering. Its deep-tech capability is validated globally, recently featured in NVIDIA CEO Jensen Huang's GTC Keynote and selected for the government's flagship Bharat Innovates 2026 showcase in France, inaugurated by Prime Minister Narendra Modi and President Emmanuel Macron.
The Future
The commercial rollout leads with the air ambulance to address the critical emergency "golden hour" , cutting urban transit times from hours to minutes. This same scalable airframe will later expand to serve passenger air taxi and urban cargo sectors , redefining city transit as a formal public unveil approaches in the coming weeks.
- Team size
- 201-500 employees people
- Founded
- 2019
- Industry
- Aviation and Aerospace Component Manufacturing
- Workplace
- On-site
- Locations
- Tiruporur, Tamil Nadu, India