Aircraft Integration Imagineer – Mechanical and Structures

Location
Thaiyur, Chennai
Workplace
On-site
Employment
Full-time

About this role

1. Job Overview

The Junior Aircraft Integration Imagineer – Structures & Mechanical will support the integration of aircraft structural components, mechanical systems, equipment and associated installations into the overall e200X aircraft configuration. The role involves working closely with structural design, mechanical design, systems engineering, avionics, electrical, manufacturing, quality and testing teams to ensure that aircraft components and systems are properly integrated in accordance with design requirements, interface specifications and airworthiness considerations.

The Imagineer will participate in aircraft assembly, installation planning, design reviews, engineering inspections, integration activities and ground testing.

2. Key Roles and Responsibilities

A. Aircraft Structural Integration

  • Support integration of primary and secondary aircraft structural components.

  • Understand aircraft structural layouts, assembly drawings, 3D CAD models and engineering drawings.

  • Assist in integration of fuselage, wings, landing gear, structural frames, bulkheads, brackets and equipment support structures.

  • Verify structural interfaces between different aircraft assemblies and subsystems.

  • Support assessment of component clearances, accessibility, maintainability and installation feasibility.

  • Assist in identifying structural interferences and installation-related design discrepancies.

  • Support structural modification and configuration change activities.

B. Mechanical Systems Integration

  • Support installation and integration of mechanical systems and equipment.

  • Assist in integration of landing gear, actuation mechanisms, doors, access panels, control linkages and mechanical support assemblies.

  • Verify mechanical interfaces, mounting provisions, fasteners and attachment arrangements.

  • Support routing and installation of hydraulic, cooling and other mechanical services, as applicable.

  • Check component accessibility, serviceability, maintainability and removal/replacement provisions.

  • Assist in evaluating vibration isolation, mechanical clearances and potential interference between moving components.

C. Aircraft-Level Integration Activities

  • Participate in aircraft-level integration planning and execution.

  • Coordinate with design and subsystem teams for interface definition and closure.

  • Support preparation and maintenance of aircraft integration drawings and installation layouts.

  • Assist in identifying and resolving aircraft-level integration issues.

  • Participate in aircraft build reviews, installation reviews and engineering inspections.

  • Support physical fit checks and dimensional verification of aircraft components.

  • Maintain interface registers, integration trackers and engineering action-item lists.

D. CAD and Engineering Documentation

  • Work with 3D CAD models and 2D engineering drawings.

  • Support aircraft digital mock-up (DMU) activities and assembly sequence studies.

  • Perform preliminary interference and clearance checks.

  • Prepare installation drawings, interface sketches and engineering reports.

  • Maintain engineering documentation, drawing revisions and configuration records.

  • Support preparation of Bills of Materials (BOMs), installation specifications and assembly instructions.

E. Manufacturing and Aircraft Assembly Support

  • Coordinate with manufacturing and production teams during aircraft assembly.

  • Support fitment checks and installation verification.

  • Participate in engineering investigations related to manufacturing and assembly discrepancies.

  • Assist in preparation and closure of Non-Conformance Reports (NCRs) and engineering change requests.

  • Support first-article installation and aircraft build activities.

F. Ground Testing and Verification

  • Participate in aircraft-level mechanical integration inspections.

  • Support structural and mechanical ground-test activities.

  • Assist in preparation of test procedures, inspection checklists and test reports.

  • Support verification of mechanical installation requirements.

  • Participate in pre-power-on and pre-ground-test aircraft readiness inspections, as applicable.

3. Technical Knowledge and Skills

The candidate should possess a basic understanding of:

  • Aircraft structural components and structural load paths.

  • Aircraft primary and secondary structures.

  • Mechanical design principles and engineering mechanics.

  • Aircraft assembly and installation practices.

  • Engineering drawings, GD&T and tolerance stack-up.

  • Fasteners, joints, brackets, fittings and mechanical interfaces.

  • Aircraft landing gear and associated mechanical arrangements.

  • Material knowledge and basic manufacturing processes.

  • Vibration, fatigue and structural integrity fundamentals.

  • Aircraft configuration management and engineering change processes.

  • Aircraft integration and verification methodologies.

4. Software Skills

Working knowledge of the following tools is desirable:

  • CAD: CATIA V5/V6, Siemens NX or SolidWorks.

  • PLM/PDM: Jira, 3DEXPERIENCE, Teamcenter or equivalent.

  • Documentation: MS Office, Excel and PowerPoint.

  • Analysis: Basic exposure to ANSYS, NASTRAN or equivalent FEA tools is desirable.

5. Airworthiness and Certification Awareness

The candidate should be willing to develop an understanding of civil aircraft airworthiness and certification requirements, including:

  • DGCA aircraft certification framework.

  • Applicable FAA/EASA certification practices.

  • CS-23 / FAR-23 structural and mechanical requirements, where applicable.

  • Applicable SC-VTOL requirements for electric vertical take-off and landing aircraft.

  • Aircraft structural substantiation and compliance documentation.

  • Inspection, traceability and configuration control requirements.

  • Engineering verification and validation processes.



Requirements

1. Essential Competencies

  • Strong fundamentals in mechanical or aerospace engineering.

  • Ability to interpret engineering drawings and 3D CAD models.

  • Good analytical and problem-solving capabilities.

  • Attention to detail and an eye for identifying integration issues.

  • Ability to coordinate with multidisciplinary engineering teams.

  • Willingness to work on actual aircraft assembly and integration activities.

  • Good technical documentation and communication skills.

  • Proactive approach towards learning and resolving engineering challenges.

2. Educational Qualification and Experience

  • B.E./B.Tech in Aerospace, Aeronautical or Mechanical Engineering.

  • 4–5 years of experience in aircraft design, structural design, mechanical design, manufacturing or aerospace integration.

  • Internship or project experience in aircraft structures, UAVs, eVTOL or aerospace manufacturing will be an added advantage.



Benefits

The position provides an opportunity to develop expertise in aircraft-level engineering integration, structural and mechanical systems installation, aircraft assembly, ground testing and airworthiness compliance. The successful candidate will gain practical exposure to the complete aircraft development lifecycle, from design and integration through manufacturing, ground testing and certification.



Apply to The ePlane Company

Clera fills in The ePlane Company's application for you.

How it works

Open the role in Clera

Sign in, and this role opens on your Clera job board, ready to apply.

Clera fills in the application

Clera fills the form from your profile and resume, and asks what's missing.

Track it in Clera

Each application you send shows up in your Clera tracker, sorted by stage.

Want Clera to find roles for you?

Ask your AI about this role

It knows you. Clera gives it the role.

Does this role fit my profile?

First time? Connect Clera once, about a minute.
One click above pre-fills the connector. Or by hand: Settings > Connectors > Add custom connector, paste https://mcp.getclera.com. Either way, sign in with the account you use on Clera and approve the consent screen.
https://mcp.getclera.com

Sign in with your Clera account. MCP docs

About The ePlane Company

The ePlane Company is redefining urban air mobility with the e200X, India's first electric air ambulance and taxi. Engineered around a compact 8 by 10 meter footprint , it utilizes existing city helipads and rooftops instead of requiring entirely new infrastructure. As a deep-tech "Make in India" breakthrough, its core subsystems—including the propellers, airframe, landing gear, and battery packs are developed entirely indigenously.

Current Stage & Capital
Backed by $21 million in total funding, including a $14 million Series B , and 7 years of subscale validation, ePlane has transitioned from simulation to hardware. Full-scale assembly of the first prototype, PT-01, is complete, integrating all core subsystems into a single physical structure. PT-01 is entering ground testing at IIT Madras to validate structural loads , moving directly into flight testing and DGCA Type Certification. Notably, ePlane holds India's first Design Organisation Approval (DOA) for a private electric aircraft.

Leadership & Credibility
Incubated at IIT Madras and founded by Prof. Satya Chakravarthy , the company pairs top-tier aerospace expertise with capital-efficient engineering. Its deep-tech capability is validated globally, recently featured in NVIDIA CEO Jensen Huang's GTC Keynote and selected for the government's flagship Bharat Innovates 2026 showcase in France, inaugurated by Prime Minister Narendra Modi and President Emmanuel Macron.

The Future

The commercial rollout leads with the air ambulance to address the critical emergency "golden hour" , cutting urban transit times from hours to minutes. This same scalable airframe will later expand to serve passenger air taxi and urban cargo sectors , redefining city transit as a formal public unveil approaches in the coming weeks.

Team size
201-500 employees people
Founded
2019
Industry
Aviation and Aerospace Component Manufacturing
Workplace
On-site
Locations
Tiruporur, Tamil Nadu, India

Benefits

  • Professional development
  • Practical exposure to aircraft development lifecycle
  • Hands-on experience in aircraft assembly and ground testing