Senior Mechanical Design Engineer [Propulsion]

$125k - $200k

Location
Long Beach
Workplace
On-site
Employment
Full-time

About this role

About Odys

At Odys, we’re mobilizing power, with Hybrid Power Systems developed for aerospace and in-demand everywhere. It’s the kind of mission diversity that demands a fresh way of thinking.

We began with an early bet on hybrid, when the mobility industry was focused on batteries. We designed, tested, and validated our first 1 MW high-speed generator in 12 months. And then we pushed further, developing systems with greater power density in less time. Today, our Hybrid Power Systems offer outputs ranging from 20 kW to 4 MW, with applications in the air or on the ground.

One of those applications is Laila, an unmanned drone designed for critical logistics and defense missions. With its 100 kW-class onboard Hybrid Power System, Laila can support medical cold-chain transport or serve as an aerial platform for counter-UAS measures.

The market interest has been overwhelming: Over 30 inbound requests from leading US and global manufacturers, and 14+ DoD contracts.

Our team comes from deep tech and aerospace, with backgrounds spanning drone and aircraft development, high-volume production, and electrified mobility.

We operate with urgency and ownership at every level. We validated high-speed generator technology faster than our peers, not because we skipped steps, but because we've been doing this long enough to know which ones matter most.

Creating the future of power, in the air and on the ground, is a challenge we’ve been training our entire lives for. If that sounds like you, this is the opportunity you’ve been waiting for.

About The Role

Odys Aviation is seeking a senior level Mechanical Design Engineer to join our Propulsion Team. In this role, you will design, analyze, and integrate mechanical and thermal systems that support high-power hybrid-electric propulsion, including motors, generators, inverters, turbines and their supporting structures and cooling systems.

You’ll work closely with electrical, manufacturing, test, and flight teams. This is a hands-on role with ownership of critical hardware, where you will play a key role as we mature our propulsion systems.

Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Odys, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway.

What You’ll Do

  1. Lead design and analysis of rotating machinery subsystems (turbines, motors, generators), addressing vibration, dynamic balancing, and bearing/seal challenges

  2. Drive resolution of real hardware issues discovered during prototype and early production builds

  3. Mentor and provide technical guidance to mid-level and junior engineers

  4. Contribute to planning and technical strategy for the propulsion team, including design reviews and technical standards

  5. Create and maintain 3D CAD models and 2D drawings, including GD&T and tolerance stackups

  6. Perform DFM/DFA trade studies, balancing weight, cost, thermal performance, reliability, and manufacturability

  7. Work with suppliers and internal teams to assess manufacturing feasibility, refine designs, and rapidly resolve build issues

  8. Support hands-on prototype assembly, integration, and test, including debugging and root cause analysis

  9. Conduct engineering analysis using a mix of hand calculations and FEA to inform design decisions

  10. Implement and refine thermal management strategies (air and/or liquid cooling, heat sinks, TIMs, enclosures, insulation)

  11. Translate test data and build feedback into actionable design improvements

  12. Document designs, analyses, and design changes clearly to support team alignment and future production

What We’re Looking For

  1. B.S. or M.S. in Mechanical Engineering, Aerospace Engineering, or a related field

  2. Experience with high speed rotating machinery and associated challenges (ex. vibration, critical speed, dynamic balancing, bearings/seals)

  3. 5+ min years of experience in mechanical design of complex systems

  4. Demonstrated experience owning and delivering on a critical assembly or subsystem with ownership from concept through build, test through production

  5. Proficiency in 3D CAD (NX preferred) and creating production-quality drawings with GD&T

  6. Strong understanding of tolerance stack-ups and real-world fit/integration challenges

  7. Experience designing for a range of manufacturing processes (machining, sheet metal, additive, etc.)

  8. Hands-on experience building, testing, and troubleshooting hardware

  9. Comfortable working on electromechanical systems (motors, power electronics, rotating machinery, batteries, cooling systems, etc.)

  10. Demonstrated ability to debug issues, perform root cause analysis, and drive corrective actions

  11. Experience working in fast-paced, iterative hardware development environments

  12. Strong problem-solving skills, attention to detail, and bias toward action

  13. Clear communicator who collaborates effectively across multidisciplinary teams

  14. Technical leadership experience (ex. leading design reviews, mentoring engineers, or setting technical standards for the team)

Nice to Have

  1. Experience with propulsion systems or electromechanical systems

  2. Background in thermal management of high-power systems (liquid cooling, forced air, heat exchangers)

  3. Experience with rotor dynamics or vibration analysis tools (e.g., modal analysis, critical-speed analysis)

  4. Experience performing thermal and/or structural analysis (FEA, analytical modeling, or CFD)

  5. Experience supporting prototype builds and early production environments

  6. Familiarity with PLM systems (Teamcenter preferred)

  7. Background in aerospace, automotive (EV/powertrain), robotics, or similar high-performance hardware industries

Apply to Odys Aviation

Clera fills in Odys Aviation's application for you.

How it works

Open the role in Clera

Sign in, and this role opens on your Clera job board, ready to apply.

Clera fills in the application

Clera fills the form from your profile and resume, and asks what's missing.

Track it in Clera

Each application you send shows up in your Clera tracker, sorted by stage.

Want Clera to find roles for you?

Ask your AI about this role

It knows you. Clera gives it the role.

Does this role fit my profile?

First time? Connect Clera once, about a minute.
One click above pre-fills the connector. Or by hand: Settings > Connectors > Add custom connector, paste https://mcp.getclera.com. Either way, sign in with the account you use on Clera and approve the consent screen.
https://mcp.getclera.com

Sign in with your Clera account. MCP docs

About Odys Aviation

Odys Aviation, formerly known as Craft Aero, is a Los Angeles-based aerospace company founded in 2019 that designs and builds vertical take-off and landing aircraft for major airlines. The company, which participated in Y Combinator's Summer 2021 batch, was founded by electric propulsion and automotive manufacturing experts with experience at leading innovators including Virgin Hyperloop, GoogleX, Volvo, and Fisker Automotive. With a lean team of 11 people, Odys Aviation has already secured two USAF Agility Prime contracts and accumulated pre-orders and options for more than 1,000 aircraft, positioning itself as a significant player in the emerging urban air mobility market.

Team size
11-50 people
Founded
2019
Industry
Defense
Workplace
On-site
Locations
Long Beach, California, United States