Internship R&D - Microstructure Engineering and Mechanical Performance of Aluminium Alloys

Workplace
On-site
Employment
Internship

About this role

C-TEC INTERNSHIP OFFER 

 

Microstructure Engineering and Mechanical Performance of Aluminium Alloys

 

 

Constellium is a world leader in the development and manufacture of high value-added aluminum products and solutions for a wide range of markets and applications, focusing in particular on aerospace, automotive and packaging. Constellium also has nearly 12,000 employees worldwide.We are committed to minimizing the environmental impact of our operations and improving the life cycle footprint of aluminum throughout the value chain.

In our company, safety is essential, it is one of our core values without compromise. Our Research and Technology Center, C-TEC Constellium Technology Center, based in Grenoble (Voreppe – 38) employs about 240 people. 

By joining our company, you will discover a multicultural company (over 20 nationalities) which is committed to diversity and the well-being of its employees.

 

 

Your mission : Impact of crystallographic texture orientation and its spatial distribution on mechanical performance of Al alloys for automotive – modeling approach

 

 

 

Context

 

Due to its low density, aluminium (Al) is a key material for sustainability as it allows lightweighting. To decrease the CO2 emissions associated with its production, it is required to massively use recycled aluminium, meaning remelting Al scrap to make new ingots. However, switching from primary synthesis (bauxite reduction) to secondary synthesis (scrap melting) often leads to increasing impurities, the main one being iron in aluminium. Such contaminants may impact the performance of the current alloys in terms of ductility/formability,. It is the case for the hemming of automotive outer panels. The latter are bent around the inner part after stamping to ensure mechanical assembly. The project of the internship is linked to microstructure optimization, and especially crystallographic texture (meaning grain orientations and their spatial arrangement) to mitigate the detrimental effects of impurities. Thus, it is key to identify how grain microstructure could be tuned to maintain current product performance, while increasing recycled content. For that, Constellium C-TEC has integrated within its modeling tools an open-source software, Damask, allowing to model the mechanical behavior of grains aggregates under different loading types, including tension and bending. A model combining Finite Element Modeling (FEM) and Crystal Plasticity (Damask) has been developed. Up to now, the simulations are performed on a Representative Volume Element (RVE) of the material (hundreds of microns size) which is built with two constraints: mean grain size and grain orientations. No spatial position and size is imposed for each texture component.

 

Objective

 

The main topic of this internship is to model explicitly a spatial distribution of orientations, using experimental data coming from EBSD (Electron BackScatter Diffraction), DCT (Diffraction Contrast Tomography) and XRD (X-ray diffraction) measurements to understand how this spatial distribution can impact the mechanical response of the material, both  the plastic anisotropy (yield surface) and the strain localization during loading. . Tensile loading will be a first case of application, particularly relevant for surface defects appearing during stamping (roping). And the model will then be extended to the more complex case of bending.

 

The project has several components

 

The role of the intern will consist, after a first phase of training in our trades and tools, to do :

 

  • Literature review on methods to transpose microstructure measurements to numerical spatially arranged RVE.
  • X-Ray diffraction (XRD) measurements to measure global crystallographic texture, together with Electron Backscatter Diffraction (EBSD) to assess spatial arrangement of grain orientations.
  • Building of a numerical twin of the microstructure to be loaded within Damask software and FEM software (Marc).
  • Handling of the existing numerical models: mainly tensile and bending ones. Some minor changes may be brought by the intern.
  • Study of the impact of spatial arrangement on surface plasticity prediction, strain localization in tension (roping defect) and bending.
  • Comparison between simulations and experiments for identifying which type of texture should be promoted to enhance performance.
  • Analysis and synthesis of the results, report writing and presentation to the team.

 

At C-TEC, the intern will be part of an R&D team of engineers with expertise in metallurgy and mechanics and will be in relation with partners handling the experimental aspects of the investigations. Interaction with an academic expert of crystal plasticity (SIMaP laboratory) is  part of the project.

 

 

 

Profile 

 

Education level: Bac+5 / M.Sc. 
Mechanical Engineering - Physics or Material Science

 

Competencies & technical & soft skills requirement :

 

  • Engineering student (last year) or Masters (M2) of Physics or Material Science
  • Candidate motivated, creative, rigorous, curious, good communication skills and autonomous
  • Knowledge in Material science, and eager to develop experimental skills
  • Knowledge of Microsoft Office
  • Good communication skills in English and French are essential

Apply to Constellium

Clera fills in Constellium's application for you.

How it works

Open the role in Clera

Sign in, and this role opens on your Clera job board, ready to apply.

Clera fills in the application

Clera fills the form from your profile and resume, and asks what's missing.

Track it in Clera

Each application you send shows up in your Clera tracker, sorted by stage.

Want Clera to find roles for you?

Ask your AI about this role

It knows you. Clera gives it the role.

Does this role fit my profile?

First time? Connect Clera once, about a minute.
One click above pre-fills the connector. Or by hand: Settings > Connectors > Add custom connector, paste https://mcp.getclera.com. Either way, sign in with the account you use on Clera and approve the consent screen.
https://mcp.getclera.com

Sign in with your Clera account. MCP docs

About Constellium

About us
Constellium is a global leader designing and manufacturing innovative and high value-added aluminum products and solutions for a broad range of applications dedicated primarily to aerospace, automotive and packaging markets.

Constellium operates 25 manufacturing sites in Europe, North & Central America and China. C-TEC, the company’s Technology Center located in Voreppe, France, and its hub in Plymouth, MI, U.S., is at the origin of many advanced aluminum alloys and solutions.

Through our three business units - Aerospace and Transportation (A&T), Packaging and Automotive Rolled Products (P&ARP), and Automotive Structures and Industry (AS&I) - Constellium anticipates and responds to the fast-evolving market needs.

The company is headquartered in Paris with corporate offices in Baltimore and in Zurich.

Constellium will never ask for your personal, financial, or other confidential information via unsolicited text, email, social media, direct message, pop-up, or phone call. Please be aware of potential scams, including from fraudulent email accounts and websites.

Team size
10,001+ employees people
Founded
2011
Industry
Fabricated Metal Products
Workplace
On-site
Locations
Voreppe, Auvergne-Rhône-Alpes, France