Internship R&D - Heat Transfer and Cooling Optimization in Aluminium Casting
- Workplace
- On-site
- Employment
- Internship
About this role
C-TEC INTERNSHIP OFFER
Constellium is a world leader in the development and manufacture of high value-added aluminum products and solutions for a wide range of markets and applications, focusing in particular on aerospace, automotive and packaging. Constellium also has nearly 12,000 employees worldwide.We are committed to minimizing the environmental impact of our operations and improving the life cycle footprint of aluminum throughout the value chain.
In our company, safety is essential, it is one of our core values without compromise. Our Research and Technology Center, C-TEC Constellium Technology Center, based in Grenoble (Voreppe – 38) employs about 240 people.
By joining our company, you will discover a multicultural company (over 20 nationalities) which is committed to diversity and the well-being of its employees.
Your mission : Experimental Investigation of Dissolved Gas Effects on Heat Transfer during Direct Chill Casting Cooling
Main objective and key accountabilities
Water cooling efficiency during Direct Chill casting is strongly influenced by boiling phenomena and water chemistry. Recent work suggests that dissolved gases, and particularly dissolved CO₂, may significantly affect heat transfer mechanisms and cooling performance. The recent acquisition of a dedicated CO₂ probe at C-TEC provides a unique opportunity to experimentally investigate these effects.
The internship will primarily focus on experimental work carried out on C-TEC's quench pilot facility. This pilot consists of an instrumented section of a casting mould equipped with industrial water spray nozzles representative of DC casting conditions. A preheated instrumented target plate, representative of the ingot surface during casting, is cooled by the water jets. Measurements performed during cooling make it possible to identify local and average heat transfer coefficients under controlled operating conditions.
The objectives of the internship are :
- Understand the influence of dissolved gases and water chemistry on boiling regimes and heat transfer efficiency.
- Develop and conduct an experimental campaign using the quench pilot and the newly acquired CO₂ probe.
- Measure dissolved CO₂ concentration and characterize its evolution under various operating conditions.
- Determine heat transfer coefficients from the thermal response of the instrumented preheated plate.
- Establish correlations between cooling performance, dissolved gas content, water chemistry, water flow conditions, …
- Identify the governing parameters controlling heat exchange during jets cooling.
- Propose new heat transfer laws that can be implemented in casting and solidification models.
Context & environment
Aluminum alloys have always been essential, among other fields, to the aeronautic industry due to their low density and higwh mechanical properties and nowadays their use is experiencing significant growth in the automotive sector for the purpose of light weighting vehicles.
The intern will be based in the R&D casting team which work on the following topics: recycling, melting, metal quality, casting and solidification. The intern will be supervised by an R&D engineer. There will be interactions with experts in modeling, casting and water chemistry.
Expected results
- Experimental database relating dissolved CO₂ concentration and water chemistry to cooling performance.
- Improved understanding of the role of dissolved gases on boiling heat transfer.
- Identification of heat transfer coefficient laws applicable to DC casting conditions.
- Recommendations for integrating the new correlations into Constellium's thermal and thermomechanical modelling tools.
- Definition of future experimental work.
This internship decomposes into several stages :
- Literature review on jets cooling, boiling heat transfer and dissolved gas effects.
- Familiarization with the quench pilot facility and instrumentation.
- Development of measurement procedures using the new CO₂ probe.
- Definition of the experimental matrix.
- Execution of experimental trials.
- Analysis of thermal and water chemistry data.
- Identification by reverse modelling of heat transfer laws.
Profile
Education level: Bac+5 / M.Sc.
Mechanical Engineering - Physics or Material Science
Competencies & technical & soft skills requirement :
- Engineering student (last year) or Masters (M2) of Physics or Material Science
- Candidate motivated, creative, rigorous, curious, good communication skills and autonomous.
- Knowledge in Material science
- Good communication skills in English and French are essential
Apply to Constellium
Clera fills in Constellium's application for you.
How it works
Open the role in Clera
Sign in, and this role opens on your Clera job board, ready to apply.
Clera fills in the application
Clera fills the form from your profile and resume, and asks what's missing.
Track it in Clera
Each application you send shows up in your Clera tracker, sorted by stage.
Ask your AI about this role
It knows you. Clera gives it the role.
First time? Connect Clera once, about a minute.
https://mcp.getclera.comSign in with your Clera account. MCP docs
About Constellium
About us
Constellium is a global leader designing and manufacturing innovative and high value-added aluminum products and solutions for a broad range of applications dedicated primarily to aerospace, automotive and packaging markets.
Constellium operates 25 manufacturing sites in Europe, North & Central America and China. C-TEC, the company’s Technology Center located in Voreppe, France, and its hub in Plymouth, MI, U.S., is at the origin of many advanced aluminum alloys and solutions.
Through our three business units - Aerospace and Transportation (A&T), Packaging and Automotive Rolled Products (P&ARP), and Automotive Structures and Industry (AS&I) - Constellium anticipates and responds to the fast-evolving market needs.
The company is headquartered in Paris with corporate offices in Baltimore and in Zurich.
Constellium will never ask for your personal, financial, or other confidential information via unsolicited text, email, social media, direct message, pop-up, or phone call. Please be aware of potential scams, including from fraudulent email accounts and websites.
- Team size
- 10,001+ employees people
- Founded
- 2011
- Industry
- Fabricated Metal Products
- Workplace
- On-site
- Locations
- Voreppe, Auvergne-Rhône-Alpes, France
Benefits
- Multicultural environment
- Diversity and inclusion