Lead Machinist - Swiss and Mill Turn
- Location
- Newtown
- Workplace
- On-site
- Employment
- Full-time
About this role
Summary: Sets-up, operates, and troubleshoots conventional, special purpose, and computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts. Experience setting up and operating Mill Turn B-Axis Twin Spindle Machines and Citizen/Tsugami multi-axis lathes (Swiss). Works with Engineering to start-up new parts. Ensures the equipment is maintained and personnel are trained to fabricate high-quality parts.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Operate Machines:
- Loads starting material into machine and unloads machined part from machine.
- Deburrs Parts as necessary for Inspection and Safety
- Performs Daily Housekeeping around machine and Daily Maintenance checks.
- Coordinates machine maintenance and machinery pm’s.
- Adjusts tool offsets and other machine offsets such as fixture offsets, cutter comp, etc.
- Sets/changes speed/feed rates to optimize machining process.
Set-Up Jobs:
- For infrequently run and extremely high-value complex machining operations, installs and aligns holding fixtures and accessories on machines per green folder instructions.
- Aligns and secures cutting tools into tool holders and then installs tool assemblies on machines per tool sheet.
- Retrieves current revision CNC program and downloads to machine.
- Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts set-up as required to make part within specification.
Tooling:
- Recognizes that tool wear has occurred.
- Adjusts tool offsets as necessary.
- Identifies correct tool versus the tool sheet and changes the tool in the machine.
- Selects alternate tools and proves them out to improve machining processes or replace tooling that is no longer available.
CNC Program:
- Reads CNC program line-by-line in order to follow tools paths.
- Line-edits CNC code to improve processes. This could include significant, complex, editing.
- Ability to create programs such as MasterCam, Part Maker, and Esprit software is preferred.
Manual Inspection:
- Uses standard hand tools such as vernier calipers, micrometers, and hard gages to ensure that parts were fabricated within specifications.
- Uses any specialty inspection device (ex: vision system) required in each machining cell.
- Identify and use alternate inspection methods to validate quality readings from standard methods.
Coordinate Measuring Machine (CMM):
- Loads part onto CMM and operates CMM to ensure that parts were fabricated within specifications
- Interprets CMM data to notice pattern shifts, quality trends, and other issues related to the machining process.
- Identify and use alternate inspection methods to validate quality readings from standard methods.
Quality System & Documentation:
- Reads and interprets blueprints, specifications, and quality plans so as to understand inspection requirements.
- Fills out Quality System paperwork and enters data into computer as necessary.
- Verifies and signs off 1st and last piece inspections.
- Alters Green Folder and notifies Process Engineering in accordance with Quality System Procedures
- Working knowledge of Excel, Word, and SolidWorks preferred
- Dispositions discrepant material in accordance with Quality System Procedures
- Approve NMRR’s within assigned dollar value limits.
Planning & Scheduling:
- Operates more than 1 machine at the same time, as required.
- Assists in scheduling work on machines to enable employees to operate efficiently.
- Will work a flexible schedule when required for training and issues related to machine, tooling, processing, etc.
Training:
- Trains other employees in the basics of operating equipment on which employee is fully competent.
- Ensures that employees assigned to the area are fully trained to perform all aspects of their job descriptions.
- Provides input to Value Stream Manager for annual performance reviews and disciplinary discussions.
- Mentors apprentices assigned to area of responsibility
Troubleshooting & Problem Solving:
- Identifies problems and discerns between machine, work holding, material, tooling and CNC program issues.
- Independently gathers and analyzes information, develops solutions and resolves problems in a timely manner.
- Work with more senior machining employees, engineers, or supervisors when extremely difficult problems arise.
Process Design & Development:
- Provides technical information and guidance to Engineering and Quality regarding process design.
- Starts-Up new parts with some assistance from engineers and programmers on less complex parts.
- Assists programmers and engineers on new part start up on more complex parts.
Repairs & Reworks:
- Independently sets-up and reworks parts on CNC and manual machines.
- Analyzes cause of discrepant material and provides remedial, corrective, and preventive actions.
Competency:
To perform the job successfully, an individual should demonstrate the following competencies:
- Quality - Demonstrates accuracy and thoroughness; Monitors own work to ensure quality; Applies feedback to improve performance; Looks for ways to improve and promote quality.
· Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity.
· Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Education/Experience:
High school diploma or general education degree (GED); Vocational Technical High School or Community College Advanced Manufacturing Certificate graduate preferred; Completed a machining related apprenticeship program or equivalent combination of education and experience. Minimum of three to five years at the Machinist level while demonstrating ability to start-up new parts and troubleshoot difficult machining problems.
Company Culture:
Ability to perform the job while demonstrating all aspects of the ARCH Experience Behaviors: Together by Choice, Continuously Improve, Walk the Talk, Being the Best, and Customer Peace of Mind.
Language Ability:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; Ability to present numerical data effectively and write routine correspondence; Ability to speak effectively to communicate with other employees of organization.
Math Ability:
Ability to work with mathematical concepts such as fundamentals of plane and solid geometry and trigonometry; Ability to apply concepts such as decimals, fractions, percentages, ratios, and proportions to practical situations; Ability to add, subtract, multiply and divide; Ability to interpret bar and line graphs.
Reasoning Ability:
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form; Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.
Computer Skills:
Working knowledge of Excel, Word, SolidWorks, and MasterCam preferred.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception.
ADDITIONAL NOTES
ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis.
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
Apply to ARCH
Clera fills in ARCH's application for you.
How it works
Open the role in Clera
Sign in, and this role opens on your Clera job board, ready to apply.
Clera fills in the application
Clera fills the form from your profile and resume, and asks what's missing.
Track it in Clera
Each application you send shows up in your Clera tracker, sorted by stage.
Ask your AI about this role
It knows you. Clera gives it the role.
First time? Connect Clera once, about a minute.
https://mcp.getclera.comSign in with your Clera account. MCP docs
About ARCH
American Manufacturing, Serving the World
We are driven by precision. Our engineering expertise and precision-machining capabilities serve the medical, aerospace and defense, and industrial markets. We offer a synergy of resources to reduce your manufacturing costs, optimize the performance of your components and products, and cut your supply chain risks.
ARCH has multiple state-of-the-art facilities that manufacture high-quality cutting tools, precision-machined components, and products. Working with ARCH, your business gains the advantage of an expanding range of cutting-edge resources for all your precision-machining needs. Our facilities are strategically located across the U.S. to optimize your outsourced precision-machining needs.
We strive to be your trusted and proactive partner. ARCH is structured to provide the capacity, flexibility, and scalability you need to succeed. We offer design-for-manufacturability, prototyping, on-site application testing, program management, technical support, and customized services.
The rise of American manufacturing requires the support of highly evolved and collaborative precision-machining partners. Our comprehensive experience in critical part production across a broad range of applications allows us to provide a dynamic range of solutions.
We truly understand the critical nature of the components and products we work with and are intently focused on delivering exacting quality to our customers, and ultimately to their customers. We combine leading-edge expertise and industry standards to ensure consistent quality at every step.
To maintain our leading edge, we invest in the continuous improvement of our manufacturing and quality assurance processes. The sharing of knowledge, technologies, and best practices across our teams strengthens our competitive advantage, accounting for performance breakthroughs, value creation, and cost containment.
- Team size
- 501-1,000 employees people
- Founded
- 2011
- Industry
- Mechanical Or Industrial Engineering
- Workplace
- On-site
- Locations
- Newtown, Connecticut, United States