General Manufacturing Hand - Chips & Coolant {H}
- Location
- Newtown
- Workplace
- On-site
- Employment
- Full-time
About this role
Summary: Provide coolant maintenance, chip removal, waste management and assist workers at the metal fabricating machines by performing the following duties.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Monitors PH and concentration levels of coolant on all machines and makes corrections as required.
Performs routine maintenance on the coolant recycling system.
Operates and performs routine maintenance on the filter/evaporator system. Monitors system for performance problems.
Operates and performs routine maintenance on the tumbling filter system.
Manages the supply of new coolant, oil, absorbent material and empty barrels.
Coordinates the removal of scrap metal and prepares waste shipments for disposal.
Labels and stores chemicals
Removes chips from machines and dumps chips into large hoppers as required.
Change coolant and clean the machine sumps as scheduled.
Performs daily housekeeping in oil room, scrap room, coolant room, loading dock, chip and bar stock areas.
Provides general shop support such as removing cardboard, trash, wood and maintaining the supply of skids.
Transports material and operates hoist to move material.
Empties vacuum cleaners as needed, inspect their condition and perform minor mechanical repairs.
Receives and stores raw material. Assists with inspection of raw material.
Set up and operates metal saw machine, belt sander and chamfer machine.
Reads job order for specifications such as material, type, and size of stock, and dimensions to be cut.
Assists in Tumbling, Shipping, and Assembly as needed.
Competency:
To perform the job successfully, an individual should demonstrate the following competencies:
- Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.
- Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works
- Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
High school diploma or general education degree (GED); 0 – 2 years Related experience and/or training in proper handling of waste,
RCRA Hazardous Waste regulations, machinery coolant maintenance preferred.
Language Ability:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Math Ability:
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to interpret bar graphs. Ability to apply concepts of basic algebra and geometry.
Reasoning Ability:
Ability to solve practical problems in standard situations. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills:
Possess Basic Computer skills.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception.
ADDITIONAL NOTES:
ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis.
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
Apply to ARCH
Clera fills in ARCH's application for you.
How it works
Open the role in Clera
Sign in, and this role opens on your Clera job board, ready to apply.
Clera fills in the application
Clera fills the form from your profile and resume, and asks what's missing.
Track it in Clera
Each application you send shows up in your Clera tracker, sorted by stage.
Ask your AI about this role
It knows you. Clera gives it the role.
First time? Connect Clera once, about a minute.
https://mcp.getclera.comSign in with your Clera account. MCP docs
About ARCH
American Manufacturing, Serving the World
We are driven by precision. Our engineering expertise and precision-machining capabilities serve the medical, aerospace and defense, and industrial markets. We offer a synergy of resources to reduce your manufacturing costs, optimize the performance of your components and products, and cut your supply chain risks.
ARCH has multiple state-of-the-art facilities that manufacture high-quality cutting tools, precision-machined components, and products. Working with ARCH, your business gains the advantage of an expanding range of cutting-edge resources for all your precision-machining needs. Our facilities are strategically located across the U.S. to optimize your outsourced precision-machining needs.
We strive to be your trusted and proactive partner. ARCH is structured to provide the capacity, flexibility, and scalability you need to succeed. We offer design-for-manufacturability, prototyping, on-site application testing, program management, technical support, and customized services.
The rise of American manufacturing requires the support of highly evolved and collaborative precision-machining partners. Our comprehensive experience in critical part production across a broad range of applications allows us to provide a dynamic range of solutions.
We truly understand the critical nature of the components and products we work with and are intently focused on delivering exacting quality to our customers, and ultimately to their customers. We combine leading-edge expertise and industry standards to ensure consistent quality at every step.
To maintain our leading edge, we invest in the continuous improvement of our manufacturing and quality assurance processes. The sharing of knowledge, technologies, and best practices across our teams strengthens our competitive advantage, accounting for performance breakthroughs, value creation, and cost containment.
- Team size
- 501-1,000 employees people
- Founded
- 2011
- Industry
- Mechanical Or Industrial Engineering
- Workplace
- On-site
- Locations
- Newtown, Connecticut, United States