Job Summary

Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification.

Key Responsibilities

1.    Assists material handling personnel with required material storage and PM requirements as needed.
2.    Communicates with others regarding inspections results and recommends corrective procedures.
3.    Participates in activities to support the company's strategic planning efforts.
4.    Participates in the preparation of Quality control ITP.
5.    Performs control measuring and tests equipment.
6.    Verifies the installation of the systems, components and equipment in accordance with the assigned discipline.

Minimum Job Requirements

1.    1+ year construction practices
2.    1+ year in quality control inspection discipline
3.    HS Degree Required
4.    Proficient use of all Microsoft Office Suite programs

Note: Job Description is subject to change at any time and may include other duties as assigned.

Physical Requirements

1.    Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)
2.    May reach above shoulder heights and below the waist on a frequent basis
3.    May stoop, kneel, or bend, on an occasional basis
4.    May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors
5.    Must be able to comply with all safety standards and procedures
6.    Occasionally will climb stairs, ladders, etc.
7.    Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis
8.    Will interact with people frequently during a shift/work day
9.    Will lift, push or pull objects on an occasional basis
10.    Will sit, stand or walk short distances for up to the entire duration of a shift/work day.

Safety Level

Safety-Sensitive

Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials.

#LI-KA1